ChinaDroneRequest a quote →
Scorpion HK-4535 Brushless Motor 12N 10P Motor Kit with disassembled motor parts and hardwareScorpion HK-4535 Brushless Motor 12N 10P Motor Kit with disassembled motor parts and hardware

Scorpion HK-4535 Brushless Motor 12N 10P Motor Kit

The Scorpion HK-4535 Brushless Motor 12N 10P Motor Kit supplies the parts for assembling a brushless motor, including housing assemblies, bearings, magnets and mounting hardware. Magnets are pre-assembled and balanced inside the rotor. The builder supplies wire and completes winding and mechanical assembly.

ScorpionDrone motor
Weight
1.243 kg

Get a free quote

Product overview

The Scorpion HK-4535 Brushless Motor 12N 10P Motor Kit provides the components for building your own brushless motor, with wire and assembly labor supplied by the builder. Assembly involves winding and terminating the stator, gluing it onto the bearing holder, and installing the bearings. The completed rotor assembly then fits onto the bearing assembly, with a washer and C-Clip securing the shaft. The magnets arrive pre-assembled and balanced inside the rotor.

The kit includes a gold electro-coated rear housing/bearing tube assembly and two high-speed shielded ball bearings. Its rotor combines a gold electro-coated front housing, a black electro-coated flux ring and a pre-installed 5.98 mm motor shaft with retaining collar. Supplied components also include a complete set of curved NdFeB magnets, a cross style aluminum backplate mount with mounting screws, and heat shrink tubing for motor lead insulation and strain relief. Weight including packaging is 1243g.

Motors & ESCs

Specifications

Scorpion HK-4535 Brushless Motor 12N 10P Motor Kit specifications
SpecificationValue & conditions
ProductScorpion HK-4535 Brushless Motor 12N 10P Motor Kit
Kit contentsAll required motor parts are supplied; wire and assembly labor are not included.Wire and assembly labor must be supplied by the builder.
Stator assemblyThe builder must wind and terminate the stator, then glue it onto the bearing holder.During kit assembly.
Bearing and rotor installationThe builder must install the bearings and rotor assembly, then secure the shaft with the washer and C-Clip.During kit assembly.
Magnet preparationMagnets are pre-assembled and balanced inside the rotor.
Rear housing and bearing tubeGold electro-coated rear housing/bearing tube assembly
BearingsTwo high-speed shielded ball bearings
Rotor assemblyGold electro-coated front housing, black electro-coated flux ring, and pre-installed 5.98 mm motor shaft with retaining collar
Mounting hardwareCross style aluminum backplate mount with mounting screws
Motor magnetsComplete set of curved NdFeB motor magnets
Lead insulation and strain reliefHeat shrink tubing for motor lead coverage and strain relief
Weight1243gIncluding packaging.

Related guides