ChinaDrone.Request a quote ↗
COMPONENT

Scorpion HK5-3220-955kv

By Scorpion ↗

The Scorpion HK5-3220-955kv is a helicopter BLDC motor designed primarily for the SAB RAW 420C. It combines internal and external fan cooling, a motor Kv of 955KV RPM/Volt and 1500 Watts continuous power. The specified LiPo cell count is 6s, with higher counts possible through appropriate gear ratio adjustment. Connectors, heat shrink and hardware accompany the motor.

Request a quote ↗
Manufacturer and modelScorpion HK5-3220-955kv
Primary applicationDesigned primarily for the SAB RAW 420C helicopter, following guidelines supplied directly by SAB Factory.
Motor Kv955KV RPM/Volt
Weight189g Grams ( 6.67oz)
Motor body dimensions40.95mm x 45.98mm (1.61" x 1.81")
External shaft dimensions4.98mm x 22mm (0.235" x 1.26")

Product overview

The Scorpion HK5-3220-955kv is a BLDC motor intended primarily for the SAB RAW 420C helicopter, developed around guidelines supplied directly by SAB Factory. Its stator measures 32 mm in diameter and 20 mm in thickness, with 12 stator arms and 10 stator poles. The electrical construction uses a 5+6 Turn Delta winding and 1.05mm motor wire, with a motor Kv of 955KV RPM/Volt. An internal fan and an external centrifugal fan provide airflow through the motor for cooling.

Installation space must accommodate a 40.95mm x 45.98mm motor body and a 4.98mm x 22mm external shaft; motor weight is 189g. Continuous ratings are 65 Amps and 1500 Watts, while the 90A and 2000 Watts peak ratings each apply for two seconds. The specified LiPo cell count is 6s; higher counts require appropriate gear ratio adjustment. The package contains one motor, three female 4mm connectors, three heat-shrink pieces and one hardware/accessory pack. Weight including packaging is 210.6g.

Specifications

SpecificationValue & conditions
Manufacturer and modelScorpion HK5-3220-955kv
Primary applicationDesigned primarily for the SAB RAW 420C helicopter, following guidelines supplied directly by SAB Factory.
Motor Kv955KV RPM/Volt
Weight189g Grams ( 6.67oz)
Motor body dimensions40.95mm x 45.98mm (1.61" x 1.81")
External shaft dimensions4.98mm x 22mm (0.235" x 1.26")
Continuous current65 Amps
Continuous power1500 Watts
Peak current90A (2 seconds)2 seconds.
Peak power2000 Watts (2 seconds)2 seconds.
Maximum LiPo cell count6sHigher cell count possible with appropriate gear ratio adjustment.
Stator diameter32 mm (1.57 in)
Stator thickness20 mm (0.79 in)
Number of stator arms12
Number of stator poles10
Motor winding5+6 Turn Delta
Motor wire1.05mm
Cooling architectureInternal fan combined with an external centrifugal fan; nearly doubled airflow through the motor.
Higher cell count operationHigher cell count is possible with appropriate gear ratio adjustment.Appropriate gear ratio adjustment.
Supplied configuration1 x HK5-3220 BLDC motor; 3 x female 4mm connectors; 3 x heat shrink; 1 x hardware / accessory pack.Included in the box.
Packaged weight210.6gIncluding packaging.
SOURCE WITH CHINADRONE

Request a quote for Scorpion HK5-3220-955kv

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
GEPRC GEP-TAKER G4 35A AIO flight controller board with USB-C port and gold solder pads
Flight control & navigation

GEP-TAKER G4 35A AIO

By GEPRC

The GEPRC GEP-TAKER G4 35A AIO is a compact flight-controller and ESC board supplied with a cable set for UAV integration. Its 7.7g architecture combines a 170MHz G473 controller, ICM 42688-P IMU, Type-C USB and 35A continuous-current capability, with a 2–4S LiPo input requirement.

FlashHobby A1506 3100KV brushless DC motor with black housing and green accents.
Motors & ESCs

FlashHobby A1506 Brushless DC Motor

By FlashHobby

The FlashHobby A1506 Brushless DC Motor is a compact FPV propulsion component offered in 3100KV, 4300KV and custom KV versions. It combines a 9N12P configuration with an aluminum bell, NMB bearing and M5 propeller mounting interface. Supplied equipment comprises one motor and mounting hardware; electrical ratings and maximum output differ by KV version.