ChinaDrone.Request a quote ↗
COMPONENT

T-MOTOR AT 115A 6-14S VTOL Fixed Wing ESC

By T-MOTOR ↗

The T-MOTOR AT 115A 6-14S VTOL Fixed Wing ESC is a 182-gram motor controller with a switching power supply and built-in UBEC. It supports 6-14S lithium batteries and a maximum peak current of 120A. The package includes one ESC and one hardware kit.

Request a quote ↗
T-MOTOR AT 115A 6-14S VTOL Fixed Wing ESC with black finned housing and attached cables
T-MOTOR AT 115A 6-14S VTOL Fixed Wing ESC with black finned housing and attached cables
Manufacturer and modelT-MOTOR AT 115A 6-14S VTOL Fixed Wing ESC
Product architectureFixed-wing electronic speed controller with a switching power supply
Supported batteries6-14S lithium batteries
Weight182 grams
Maximum peak current120A
Built-in UBEC servo capacitySix servos simultaneouslyUnder 6S voltage.

Product overview

The T-MOTOR AT 115A 6-14S VTOL Fixed Wing ESC provides motor regulation for fixed-wing and VTOL UAV installations. Its electrical architecture incorporates a switching power supply and built-in UBEC, combining propulsion control with servo power provision. The controller supports 6-14S lithium batteries, weighs 182 grams and has a maximum peak current of 120A. These characteristics define its battery integration range, component mass and peak-current capability within the aircraft’s propulsion installation.

The built-in UBEC can drive six servos simultaneously under 6S voltage. Its BEC output ratings are 5.2V/6V/7.4V/10A/25A, and the controller offers high-speed throttle response alongside multiple programmable parameters. T-MOTOR recommends AT3-7 series motors for use with the ESC. The supplied configuration consists of one AT115A ESC and one hardware kit, making this a propulsion electronics package for integration into an aircraft rather than a complete flight platform or an airframe-only kit.

Specifications

SpecificationValue & conditions
Manufacturer and modelT-MOTOR AT 115A 6-14S VTOL Fixed Wing ESC
Product architectureFixed-wing electronic speed controller with a switching power supply
Supported batteries6-14S lithium batteries
Weight182 grams
Maximum peak current120A
Built-in UBEC servo capacitySix servos simultaneouslyUnder 6S voltage.
BEC output ratings5.2V/6V/7.4V/10A/25A
Recommended motor seriesAT3-7 series motors
Throttle responseHigh-speed throttle response
ProgrammabilityMultiple programmable parameters
Supplied configuration1 × T-Motor AT115A ESC; 1 × hardware kit
SOURCE WITH CHINADRONE

Request a quote for T-MOTOR AT 115A 6-14S VTOL Fixed Wing ESC

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
V8013 PRO IPE 150KV drone motor with black housing and central mounting hub
Motors & ESCs

V8013 PRO IPE

By MAD Components

The MAD V8013 PRO IPE V1.0 is a VTOL propulsion motor designed to align its propeller horizontally relative to the wing after shutdown. Available in 135KV, 150KV and 170KV versions, it combines defined motor and propeller mounting interfaces with an anticorrosive stator, centrifugal heat dissipation and IP35 protection.

T-MOTOR AT4120 Long Shaft KV250 motor with gray housing and visible copper windings.
Motors & ESCs

T-MOTOR AT4120 Long Shaft KV250 motor

By T-MOTOR

The T-MOTOR AT4120 Long Shaft KV250 is a brushless motor for VTOL and fixed-wing propulsion integration. Its published KV250 configuration specifies 12S LiPo operation and 2100W maximum power for 180 seconds. Supplied as a motor with hardware, it requires configuration-specific installation assessment; the manufacturer's bench data are reference values.