Product overview
The MAD BSC 6218 V1.0 200KV Brushless Drone Motor provides propulsion for 12S long-range FPV and multirotor platforms, with intended applications spanning endurance, surveillance and transport. Its 24N28P outrunner architecture uses high slot fill copper windings and curved magnets. The motor measures D:69.7 × 44 mm and weighs 365 g including leads. Integration interfaces comprise an 8 mm shaft, D:30 M4×4 motor mounting holes, D:20 M3×4 and D:18 M3×4 propeller mounting patterns, and 600 mm, 14 AWG silicone leads.
Output depends on propeller and throttle configuration. With a 24×7.2×2 propeller on 12S at 100% throttle, maximum thrust is 14,526 g per axis; the corresponding operating point is 46.42 V, 90.5 A and 4201.8 W. The same propeller produces 5048 g at 50% throttle and 9806 g at 75%. Propeller application ranges are 19–24 inches for two blades, 18–20 inches for three blades and 19–22 inches for four blades, covering endurance, balanced flight characteristics and heavy-payload thrust applications respectively.
The supplied product is a motor with mounting hardware. The package contains one BSC 6218 V1.0 200KV motor, an M6 propeller mount adapter, four M3×8 and four M4×12 socket head cap screws, propeller plates, an M6 nut and one mating ring. Package weight is 430 g. The electrical rating is 48 V DC (12S), and no-load current is 1.45 A at 20 V. Maximum power is 4202 W, corresponding to the full-throttle 24×7.2×2 propeller configuration.
Specifications
| Specification | Value & conditions |
|---|---|
| Motor model | BSC 6218 V1.0 |
| Stator | 24N28P |
| Motor size | D:69.7 × 44 mm |
| Rotor balance | Dynamically balanced to ≤5 mg |
| KV | 200 KV |
| Line resistance | 37.5 mΩ |
| No-load current | 1.45 A / 20 V20 V. |
| Rated voltage | 48 V DC (12S) |
| Maximum current | 90.5 A100% throttle; 24×7.2×2 propeller; 46.42 V. |
| Maximum power | 4202 W100% throttle; 24×7.2×2 propeller; 46.42 V. |
| Maximum thrust | 14,526 g per axis100% throttle; 24×7.2×2 propeller; 12S. |
| Motor weight | 365 gIncluding leads. |
| Propeller mounting holes | D:20 M3×4, D:18 M3×4 |
| Motor mounting holes | D:30 M4×4 |
| Shaft diameter | 8 mm (IN) |
| Cable | 600 mm, 14 AWG silicone |
| Package weight | 430 g |
| Recommended platforms | 18–24 in long-range FPV |
| KV option | 200KV |
| Architecture and intended missions | 24N28P outrunner for 18–24 inch long-range FPV and multirotor platforms; intended for light-lift endurance, medium-lift surveillance and heavy-lift transport.12S operation. |
| Four-blade application | Quiet operation for heavy payloads or extreme thrust demands; 6% noise reduction.4-blade, 19–22 in propellers. |
| Winding and magnet construction | High slot fill copper windings and curved magnets for lower internal resistance, less heat and smoother thrust delivery. |
| Two-blade application | Optimized for endurance and efficient cruise, with higher aerodynamic efficiency.2-blade, 19–24 in propellers. |
| Three-blade application | Balance and structural rigidity between efficiency and flight stability.3-blade, 18–20 in propellers. |
| Supplied configuration | 1 × BSC 6218 V1.0 200KV motor; M6 propeller mount adapter; M3×8 socket head cap screws ×4; M4×12 socket head cap screws ×4; propeller plate ×1 listed twice; M6 nut; mating ring ×1.Included equipment. |
| Two-blade full-throttle performance |
|
| Three-blade full-throttle performance |
|
| Four-blade full-throttle performance |
|
| Half-throttle performance |
|
| Three-quarter-throttle performance |
|
Request a quote for MAD BSC 6218 V1.0 200KV Brushless Drone Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
