ChinaDroneRequest a quote →
Scorpion HK-3226 12N10P Brushless Motor Kit with rotor, stator, housing, bearings and hardwareScorpion HK-3226 12N10P Brushless Motor Kit with rotor, stator, housing, bearings and hardware

Scorpion HK-3226 12N10P Brushless Motor Kit

The Scorpion HK-3226 12N10P Brushless Motor Kit supplies components for building a brushless motor, including a laminated stator, rotor assembly, bearings and mounting hardware. Magnets are pre-assembled and balanced inside the rotor. The builder supplies wire and labor to complete winding, termination and assembly.

ScorpionDrone motor
Weight
228 g

Get a free quote

Product overview

The Scorpion HK-3226 12N10P Brushless Motor Kit provides the parts for building a brushless motor, with wire and assembly labor supplied by the builder. Completion involves winding and terminating the stator, gluing it onto the bearing holder, installing the bearings, and fitting the rotor assembly before securing the shaft with the washer and C-Clip. The magnets are already assembled and balanced inside the rotor, and the rotor assembly incorporates a pre-installed 5mm motor shaft with a retaining collar.

The assembled stator uses 0.20mm laminations and powder-coated inner surfaces to prevent winding shorts. Gold electro-coated front and rear housings accompany a black electro-coated flux ring, two high-speed shielded ball bearings and curved NdFeB magnets. A cross-style aluminum backplate mount and mounting screws are supplied, together with heat shrink tubing for lead insulation and strain relief. Box contents also include an end bell, magnet holding ring, two C-Clips, a washer and two set screws. Weight including packaging is 228g.

Motors & ESCs

Specifications

Scorpion HK-3226 12N10P Brushless Motor Kit specifications
SpecificationValue & conditions
ProductScorpion HK-3226 12N10P Brushless Motor Kit
Builder-supplied materials and workWire and assembly labor must be supplied by the builder.
Required assemblyWind and terminate the stator; glue it onto the bearing holder; install the bearings; fit the rotor assembly and secure the shaft with the washer and C-Clip.
Magnet preparationMagnets are pre-assembled and balanced inside the rotor.
Stator constructionAssembled stator with 0.20mm laminations and powder-coated inner surfaces to prevent winding shorts.
Rear housing and bearing tubeGold electro-coated rear housing/bearing tube assembly.
Bearing constructionTwo high-speed shielded ball bearings.
Rotor constructionGold electro-coated front housing, black electro-coated flux ring, and pre-installed 5mm motor shaft with retaining collar.
MountCross-style aluminum backplate mount with mounting screws.
Magnet constructionComplete set of curved NdFeB motor magnets.
Lead insulation and strain reliefHeat shrink tubing covers motor leads and provides strain relief.
Included front housingFront housing with black rotor × 1.
Included end bellEnd bell × 1.
Included statorStator × 1.
Included motor shaftMotor shaft × 1.
Included motor bearingsMotor bearings × 2.
Included magnetsMagnets × 10.
Included magnet holding ringMagnet holding ring × 1.
Included heat shrinkHeat shrink × 5.
Included C-ClipsC-Clips × 2.
Included washerWasher × 1.
Included set screwsSet screws × 2.
Weight228gIncluding packaging.

Related guides