ChinaDroneRequest a quote →

Scorpion S-18 Motor Bearing Kit

The Scorpion S-18 Motor Bearing Kit contains two original equipment replacement bearings for both Scorpion S-18 series motors. Each bearing measures 6mm OD x 3mm ID x 2.5mm thick and provides an exact replacement for the stock motor bearings.

ScorpionMotors, ESCs & propellers
Weight
2.88 g

Get a free quote

Product overview

The Scorpion S-18 Motor Bearing Kit supplies a pair of original equipment replacement bearings for both Scorpion S-18 series motors. Designed to replace the stock bearings, the kit supports motor maintenance when bearings become damaged, including after a crash or landing in dirt. Each bearing measures 6mm outside diameter by 3mm inside diameter by 2.5mm thick. The kit weighs 2.88g including packaging, and a Bearing Lubrication Kit is available as an optional accessory.

The bearings fit snugly into the motor housings. Old bearings may require gentle tapping to remove, but replacement bearings must be pressed into place using the outer race. Tapping new bearings can dent the ball races and ruin them. Pressure on the inner race can also damage the bearing and lead to premature failure.

Motors & ESCs

Specifications

Scorpion S-18 Motor Bearing Kit specifications
SpecificationValue & conditions
ProductScorpion S-18 Motor Bearing Kit
Included equipmentOne pair of original equipment replacement bearings
Motor compatibilityFits both Scorpion S-18 series motors
Bearing dimensions6mm OD x 3mm ID x 2.5mm thick
Replacement fitExact replacement for the stock motor bearings
Weight2.88gIncluding packaging.
Optional accessoryBearing Lubrication Kit
Bearing removalSnug housing fit; old bearings may require gentle tapping for removal.When removing old bearings.
Installation requirementsPress bearings in by the outer race. Do not tap them into place or apply pressure to the inner race, as this can damage the bearings and cause premature failure.When installing new bearings.

Related guides