The HEEWING FX-2207-1960 Motor for F-01 is a brushless motor rated at 1960KV and intended for the F-01. Its procurement identity combines the HEEWING brand, FX-2207-1960 model designation and explicitly named F-01 platform association.
Get a free sourcing quote for HEEWING FX-2207-1960 Motor for F-01
The HEEWING FX-2207-1960 is a brushless motor for the F-01. Its hardware identity is the FX-2207-1960 model, with a stated motor rating of 1960KV.
For procurement, the designated component is the HEEWING motor for the F-01. The model designation, brushless construction and 1960KV rating identify the motor configuration.
| Specification | Value & conditions |
|---|---|
| Brand | HEEWING |
| Model | FX-2207-1960 |
| Motor type | Brushless motor |
| Motor KV rating | 1960KV |
| Intended platform | F-01 |
The BrotherHobby Returner 3-6S 32Bit 65A(4IN1) ESC XT V3 PRO is a four-in-one motor speed controller with 65A*4 continuous current and a 75A maximum for 10 seconds. It combines 3-6S input, PWM and DSHOT control, current measurement, telemetry feedback, external capacitors and specified mounting and connector interfaces.
The Scorpion HK-4015 Shaft Kit (5mm) is a replacement component kit for HK-4015 helicopter motors. It supplies a 73.7mm-long, 6mm-diameter shaft with a 5mm output end, plus a washer and two C-clips. Installation involves a press-fit housing interface, while use in other brushless motors depends on matching shaft dimensions.
The Long UAV FC&ESC Stack F405 V3 BLS 65A is a flight controller and ESC assembly for UAV integration. It combines sensor-equipped control electronics, serial interfaces and a 65 A continuous-current ESC. Matching mounting patterns support installation, while different board voltage ranges constrain power selection. Mounting accessories, a capacitor and connection cables are supplied.
The MAD PULSAR BL-S 8S 70A 4IN1 ESC is a BLHeli_S electronic speed controller for drone integration and casual flying. Its continuous-current operation requires forced air cooling below 90 degrees, limiting use in long-endurance aircraft without that cooling.
The T-MOTOR AT2820 Long Shaft KV880 is a fixed-wing propulsion motor intended for 1.4-1.6kg 3D, F3A and UAV aircraft. Supplied with a hardware pack, it weighs 139g including cable and supports 3-4S LiPo batteries. Its 700W maximum-power rating carries a 180-second qualification.
The EMAX BL3526 is a BL Series brushless motor intended for general propulsion, aircraft builds and custom engineering applications, with a focus on FPV performance tuning. It weighs 438g, has a stator size designated 3526 and offers 685KV and 860KV options.
The Scorpion A2-10020-160kv is a BLDC motor for freestyle and UAV airplanes, including 120cc-equivalent applications on 12s LiPo. Supplied with selectable mounting hardware and propeller mounting accessories, it provides a 6000 Watts continuous rating and 9300 Watts intermittent peak rating, with installation dimensions and cooling-dependent operating limits.
The FlashHobby H700 Helicopter Motor is a 530KV motor component with a 12N/10P configuration, a 6mm shaft and a 5mm male connector. It weighs 492g including cables and supports 3–12S LiPo configurations. Continuous ratings are 100A and 4500W, with higher peak ratings limited to two seconds.
SPIRO AW is a carbon-plastic composite propeller series.
The FLASH HOBBY MT3515 is a 400KV brushless DC outrunner motor for racing drones, agricultural applications and radio-controlled aircraft. Its 12N14P construction includes 48SH magnets and a CNC-machined 6061-T6 aluminum bell. It measures 42 x 33.4mm and weighs 158.0g including cables, with custom KV and physical customization options.