Product overview
The Scorpion A2-10020-160kv is a BLDC propulsion motor for freestyle and UAV airplanes. Its intended applications include aircraft requiring a 120cc-equivalent gas engine replacement on 12s LiPo, airframes requiring up to 9300w, and lightweight motor setups for 150cc airframes. The supplied configuration is a motor and mounting accessory package. For a 12s installation, the recommended propeller is the Scorpion 30x12 Carbon, paired with the recommended Tribunus III 14-220A ESC SBEC.
The motor combines a 100 mm diameter, 20 mm thick stator with 24 stator arms and 28 magnet poles. Construction includes 0.2mm silicon steel stator sheets and enamel-coated copper windings rated above 200C+. Installation space must accommodate the 112.2mm x 59.25mm motor body and additional 30mm prop spacer. The external shaft measures 10mm. Motor-only weight is 1406.8g, increasing to 1640.4g with the mount and prop mount accessories. Four cross mount options cover the listed mounting configurations.
The package includes one selected A2-100 cross mount, a prop mount specified as 6x M5@29mm, three female 6mm bullet connectors, an accessory hardware pack and three stickers. Electrical ratings distinguish 6000 Watts continuous power from 9300 Watts peak power. Peak power applies to intermittent full throttle operation lasting 10–180 seconds, depending on use case and cooling; continuous current is subject to power-percentage reduction factors. The maximum rated battery configuration is 12s, with higher cell counts possible when using smaller propellers.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer, model and intended application | Scorpion A2-10020-160kv airplane motor for 120cc-equivalent applications on 12s LIPO, other airframes requiring up to 9300w, and lightweight setups for 150cc airframes.12s LIPO for the 120cc-equivalent application. |
| Motor Kv | 160 RPM / Volt |
| Motor weight | 1406.8g (49.62 oz)Motor only. |
| Weight with mounting accessories | 1640.4g (57.86 oz)Including mount and prop mount accessories. |
| Motor body dimensions | 112.2mm x 59.25mm (+30mm prop spacer) (4.42" x 2.33" (+ 1.18"))Includes the stated additional prop spacer dimension. |
| External shaft diameter | 10mm |
| Continuous current | 130ASubject to Power % reduction factors. |
| Continuous power | 6000 Watts |
| Peak current | 205A |
| Peak power | 9300 WattsIntermittent full throttle usage for 10 - 180 seconds, depending on use case and cooling. |
| Maximum rated LiPo cell count | 12sHigher cell count possible with smaller prop usage. |
| Stator diameter | 100 mm (3.94 in) |
| Stator thickness | 20 mm (0.79 in) |
| Number of stator arms | 24 |
| Magnet poles | 28 |
| Motor winding | 7+8 T 4Y |
| Motor wire | 10-Strand 0.41mm |
| No-load current | 2.47 AmpsIO/15V. |
| Motor internal resistance | 9.3 mΩPhase-phase. |
| Motor inductance | 13.8 µHPhase-phase at 1khz. |
| Recommended ESC | Tribunus III 14-220A ESC SBEC |
| Recommended propeller | Scorpion 30x12 CarbonFor 12s. |
| Stator sheet and winding construction | 0.2mm silicon steel stator sheets and enamel-coated copper windings rated above 200C+. |
| Cross mount options | A2-100 70mm Stock, 130mm Stock, 100-120cc, or 150-170cc cross mount.One cross mount selected at checkout. |
| Supplied configuration | 1 x A2-10020 BLDC motor; 1 x A2-100 cross mount; 1 x A2-100 (6x M5@29mm) prop mount; 3 x female 6mm bullets; 3 x Scorpion stickers; 1 x accessory hardware pack.Cross mount chosen at checkout. |
| Current and peak-power operating limitations | Continuous current is subject to Power % reduction factors. Peak power is limited to intermittent full throttle usage ranging from 10 - 180 seconds depending on use case and cooling.Continuous current and intermittent full throttle operation. |
| Higher cell-count qualification | Higher cell count is possible with smaller prop usage.Smaller prop usage. |
Request a quote for Scorpion A2-10020-160kv
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
