ChinaDroneRequest a quote →
Scorpion SII-22 Motor Bearing Kit (V2) with two bearings in retail packagingScorpion SII-22 Motor Bearing Kit (V2) with two bearings in retail packaging

Scorpion SII-22 Motor Bearing Kit (V2)

The Scorpion SII-22 Motor Bearing Kit (V2) contains two original equipment replacement bearings for Scorpion SII-22 series motors and also fits the S-22 Motor Series. Each bearing measures 7mm outside diameter × 3mm inside diameter × 3mm thick.

ScorpionMotors, ESCs & propellers
Weight
3.12 g

Get a free quote

Product overview

The Scorpion SII-22 Motor Bearing Kit (V2) supplies a pair of original equipment replacement bearings for servicing Scorpion SII-22 series motors. Suitable for replacing bearings damaged after a crash or landing in dirt, the kit also fits the S-22 Motor Series. Each bearing measures 7mm outside diameter × 3mm inside diameter × 3mm thick and directly replaces the stock motor bearing. Weight including packaging is 3.12g.

The bearings fit snugly into the motor housings. Old bearings may need gentle tapping for removal, while new bearings must be pressed into place through the outer race. Do not tap new bearings into the housings: impact can dent the ball races and ruin the bearings. Pressure on the inner race can also damage the bearing and lead to premature failure.

Motors & ESCs

Specifications

Scorpion SII-22 Motor Bearing Kit (V2) specifications
SpecificationValue & conditions
ProductScorpion SII-22 Motor Bearing Kit (V2)
Supplied bearings and SII-22 compatibilityOne pair of original equipment replacement bearings for Scorpion SII-22 series motors.
Bearing dimensions7mm outside diameter × 3mm inside diameter × 3mm thick.
Stock bearing replacementExact replacement for the stock motor bearings.
S-22 compatibilityAlso suitable for the S-22 Motor Series.
Weight3.12gIncluding packaging.
Bearing fit and removalSnug fit in the motor housings; old bearings may require gentle tapping for removal.When removing old bearings.
Installation requirementsPress bearings into place by the outer race. Do not tap new bearings into place or apply pressure to the inner race; this can damage the bearings and cause premature failure.When installing new bearings.

Related guides