ChinaDroneRequest a quote →
Scorpion SII / A - 30 Motor Bearing Kit (V2) with two bearings in retail packagingScorpion SII / A - 30 Motor Bearing Kit (V2) with two bearings in retail packaging

Scorpion SII / A - 30 Motor Bearing Kit (V2)

The Scorpion SII / A - 30 Motor Bearing Kit (V2) contains two original equipment replacement bearings for Scorpion SII-30 Series motors, excluding S-3032 Series motors. Each bearing measures 10mm OD × 5mm ID × 4mm thick and fits snugly into the motor housing.

ScorpionMotors, ESCs & propellers
Weight
3.6 g

Get a free quote

Product overview

The Scorpion SII / A - 30 Motor Bearing Kit (V2) supplies two original equipment replacement bearings for Scorpion SII-30 Series motors, excluding S-3032 Series motors. Designed to replace the stock motor bearings, the kit supports maintenance when bearings become damaged, including after a crash or landing in dirt. Each bearing measures 10mm outside diameter × 5mm inside diameter × 4mm thick. The kit weighs 3.6g including packaging.

The bearings fit snugly into the motor housings. During replacement, old bearings may require gentle tapping to remove. Install new bearings by pressing on the outer race; do not tap them into place, as impacts can dent the ball races and ruin the bearings. Keep installation pressure off the inner race to avoid bearing damage and premature failure.

Motors & ESCs

Specifications

Scorpion SII / A - 30 Motor Bearing Kit (V2) specifications
SpecificationValue & conditions
ProductScorpion SII / A - 30 Motor Bearing Kit (V2)
Motor compatibilityAll Scorpion SII-30 Series motorsExcept S-3032 Series motors.
Package contentsTwo original equipment replacement bearings
Bearing dimensions10mm OD x 5mm ID x 4mm thick
Weight3.6gIncluding packaging.
Bearing fitExact, snug fitInstalled in compatible motor housings.
Installation methodPress bearings in by the outer race; pressure on the inner race can cause damage and premature failure.When installing new bearings.
Installation restrictionDo not tap bearings into place; impacts can dent the ball races and ruin the bearings.When installing new bearings.

Related guides