ChinaDroneRequest a quote →
Scorpion SII-3032 Motor Bearing Kit (V2) with three bearings in retail packagingScorpion SII-3032 Motor Bearing Kit (V2) with three bearings in retail packaging

Scorpion SII-3032 Motor Bearing Kit (V2)

The Scorpion SII-3032 Motor Bearing Kit (V2) provides original equipment replacement bearings for Scorpion SII-3032 Series motors only. Intended for motor maintenance and replacement of damaged bearings, it includes front and rear bearings sized for a snug fit in the motor housings.

ScorpionMotors, ESCs & propellers
Weight
16.8 g

Get a free quote

Product overview

The Scorpion SII-3032 Motor Bearing Kit (V2) supplies original equipment replacement bearings exclusively for Scorpion SII-3032 Series motors. Designed for replacement of the stock motor bearings, the kit supports maintenance when bearings become damaged, including after a crash or landing in dirt. The bearings fit snugly into the motor housings.

The rear bearing measures 37mm outside diameter × 30mm inside diameter × 4mm thick; the front bearings measure 10mm outside diameter × 5mm inside diameter × 4mm thick. Weight including packaging is 16.8g. During installation, press each bearing into place through its outer race. Tapping new bearings into position or applying pressure to the inner race can damage them.

Motors & ESCs

Specifications

Scorpion SII-3032 Motor Bearing Kit (V2) specifications
SpecificationValue & conditions
ProductScorpion SII-3032 Motor Bearing Kit (V2)
Replacement bearing typeOriginal equipment replacement bearingsFor Scorpion SII-3032 Series motors only.
Rear bearing dimensions37mm OD × 30mm ID × 4mm thickRear side of the motor.
Front bearing dimensions10mm OD × 5mm ID × 4mm thickFront side of the motor.
Weight16.8gIncluding packaging.
Bearing fitExact, snug fitInstalled in the motor housings.
Removal guidanceGentle tapping may be needed.When removing old bearings.
Installation methodPress bearings in by the outer race; never apply pressure to the inner race.When installing new bearings.
Installation restrictionDo not tap bearings into place; tapping can dent the ball races and ruin the bearings.When installing new bearings.

Related guides