ChinaDroneRequest a quote →
Scorpion S-40 Motor Bearing Kit (1.0) with three bearings in retail packagingScorpion S-40 Motor Bearing Kit (1.0) with three bearings in retail packaging

Scorpion S-40 Motor Bearing Kit (1.0)

The Scorpion S-40 Motor Bearing Kit (1.0) provides three original equipment replacement bearings for Scorpion S-40mm Series motors using three bearings, excluding S4035 series motors. Supplied as one rear and two front bearings, the kit supports replacement of damaged motor bearings.

ScorpionMotors, ESCs & propellers
Weight
9 g

Get a free quote

Product overview

The Scorpion S-40 Motor Bearing Kit (1.0) supplies three original equipment replacement bearings for Scorpion S-40mm Series motors that use three bearings, excluding S4035 series motors. Intended for replacing damaged motor bearings, the kit contains one rear bearing and two front bearings. The rear bearing measures 13mm OD x 6mm ID x 5mm thick; each front bearing measures 10mm OD x 6mm ID x 3mm thick.

These bearings replace the motors’ stock bearings and fit snugly into the motor housings. During installation, press each bearing into place through its outer race. Do not tap new bearings into the housing or apply pressure to the inner race: these methods can damage the races and cause premature bearing failure. The kit weighs 9g including packaging.

Motors & ESCs

Specifications

Scorpion S-40 Motor Bearing Kit (1.0) specifications
SpecificationValue & conditions
ProductScorpion S-40 Motor Bearing Kit (1.0)
Motor compatibilityScorpion S-40mm Series motors using three bearings, except S4035 series motorsFor Scorpion S-40mm Series motors that use three bearings; excludes S4035 series motors.
Supplied bearingsThree original equipment replacement bearings
Bearing positionsOne rear bearing and two front bearings
Rear bearing dimensions13mm OD x 6mm ID x 5mm thickRear bearing.
Front bearing dimensions10mm OD x 6mm ID x 3mm thickFront bearings.
Weight9gIncluding packaging.
Bearing fitExact, snug fitInstalled in the compatible motor housings.
Installation methodPress bearings in by the outer race; never apply pressure to the inner race.During bearing installation.
Installation restrictionDo not tap new bearings into place; impacts can dent the ball races and ruin the bearings.During installation of new bearings.

Related guides