ChinaDroneRequest a quote →
Scorpion S-30 Motor Bearing Kit with three bearings in retail packagingScorpion S-30 Motor Bearing Kit with three bearings in retail packaging

Scorpion S-30 Motor Bearing Kit

The Scorpion S-30 Motor Bearing Kit supplies three original equipment replacement bearings for Scorpion S-30 Series motors, excluding S-3032 Series motors. Designed for motor maintenance, the kit includes rear and front bearings that replace the stock bearings with a snug fit in the motor housings.

ScorpionMotors, ESCs & propellers
Weight
4.2g.

Get a free quote

Product overview

The Scorpion S-30 Motor Bearing Kit provides three original equipment replacement bearings for servicing Scorpion S-30 Series motors, excluding S-3032 Series motors. It replaces stock bearings that may become damaged after a crash or a landing in dirt. The set contains a rear bearing measuring 10mm OD x 5mm ID x 4mm thick and front bearings measuring 8mm OD x 5mm ID x 2.5mm thick. Weight including packaging is 4.2g.

The bearings fit snugly into the motor housings as exact replacements for the original bearings. Removing old bearings may require gentle tapping. Install the new bearings by pressing on the outer race, without tapping them into place: impacts can dent the ball races and ruin the bearings. Keep installation pressure off the inner race, as pressure there can damage the bearing and lead to premature failure.

Motors & ESCs

Specifications

Scorpion S-30 Motor Bearing Kit specifications
SpecificationValue & conditions
Product type and contentsScorpion S-30 Motor Bearing Kit containing three original equipment replacement bearings.
Motor compatibilityFits all Scorpion S-30 Series motors except S-3032 Series motors.For Scorpion S-30 Series motors, except S-3032 Series motors.
Rear bearing dimensions10mm OD x 5mm ID x 4mm thick.Rear bearing.
Front bearing dimensions8mm OD x 5mm ID x 2.5mm thick.Front bearings.
Weight4.2g.Including packaging.
Bearing fitExact replacements for the stock motor bearings, with a snug fit in the motor housings.Installed in the motor housings.
Removal methodOld bearings may require gentle tapping to remove.During removal of old bearings.
Installation method and restrictionsPress bearings in by the outer race. Do not tap them into place or apply pressure to the inner race; this can damage the bearings and cause premature failure.During installation of new bearings.

Related guides