iFlight Borg Mini F7 Stack (60RS 4-IN-1 ESC) - w/Rx

The iFlight Borg Mini F7 Stack (60RS 4-IN-1 ESC) - w/Rx pairs a flight controller with an onboard ELRS 2.4GHz receiver and a 60A ESC for FPV racing. Supporting 4-8S LIHV batteries, it includes FPC interconnection, a cable set and five silicon grommets.

iFlightDrone motor

Weight: 6.8g±1
Dimensions: 34x28.5 mm±1
Input voltage: 4-8S; supports LIHV battery

Product overview

The iFlight Borg Mini F7 Stack (60RS 4-IN-1 ESC) - w/Rx combines a flight controller with an onboard ELRS 2.4GHz receiver and a Borg 60RS 4-in-1 ESC for FPV racing. Both boards accept 4-8S input and support LIHV batteries. The flight controller uses an STM32F722RET6 MCU, ICM42688 gyro and 16MB Blackbox flash, with six UARTs and four motor outputs. Its integrated 12V BEC allows remote switching of VTX power, while FPC cables connect the flight controller and ESC.

The ESC uses an 8-layer 3OZ PCB, an integrated anti-spark filter and built-in high polymer capacitors that eliminate the need for external capacitors in racing models. It handles 60A maximum continuous current and 65A bursts for 10 seconds, with support for DShot150/300/600, MultiShot and OneShot protocols. The package includes one flight controller with SMD receiver, one Borg 60RS 4-in-1 ESC, one cable set and five silicon grommets. The stack is for recreational use only and does not support autonomous flight.

Motors & ESCsFlight control & navigationLinks & controllers

Specifications

iFlight Borg Mini F7 Stack (60RS 4-IN-1 ESC) - w/Rx specifications
Specification	Value & conditions
Input voltage	4-8S; supports LIHV batteryFlight controller.
MCU	STM32F722RET6Flight controller.
Gyro	ICM42688Flight controller.
OSD chip	AT7456E (LGA)Flight controller.
Flash	16MB (Blackbox flash)Flight controller.
UARTs	6Flight controller.
Motor outputs	4Flight controller.
Betaflight firmware target	IFLIGHT_BLITZ_F722Flight controller.
Mount pattern	20x20 φ4Flight controller.
Dimensions	34x28.5mm±1Flight controller.
Weight	6.8g±1Flight controller.
MCU	ESP8285SMD receiver.
RF	SX1281SMD receiver.
Receiver type	2.4GHzSMD receiver.
Telemetry power	17mW (12.3dBm)SMD receiver.
Lua script	IFlight 2.4GHz NanoSMD receiver.
Firmware	IFlight 2.4GHz Nano RXSMD receiver.
Product name	Borg 60RS ESCESC.
Input voltage	4-8S; supports LIHV batteryESC.
Maximum continuous current	60AESC.
Maximum burst current	65A (10s)ESC; 10s burst.
MCU	STM32G071NESC.
Driver	FD6288ESC.
Firmware	BL32 (32bit ESC)ESC.
Target	IFLIGHT_BLITZ_G3 32.9ESC.
Dimensions	45x35mm±1ESC.
Mounting holes	20x20 mm/Φ4ESC.
Protocol	Supports DShot150/300/600, MultiShot, OneShot, etc.ESC.
Construction and features	Built-in ELRS 2.4GHz receiver with external antenna compatibility; remotely switchable 12V VTX BEC; FPC connection between flight controller and ESC; SH1.0 connectors on other interfaces; ESC with 8-layer 3OZ PCB, integrated anti-spark filter and built-in high polymer capacitors.Flight controller and ESC; external capacitors are unnecessary in racing models.
Package contents and use limitation	1 x Borg Mini F7 Flight Controller With SMD Receiver; 1 x Borg 60RS 4-in-1 ESC; 1 x cable set; 5 x silicon grommets. For recreational use only; does not support autonomous flight.Supplied equipment; recreational use only, without autonomous flight support.