ChinaDrone.Request a quote ↗
COMPONENT

EMAX Mini Magnum 2.5 - F4 BLHELI32 35amp 6S MMCX

By EMAX ↗

The EMAX Mini Magnum 2.5 - F4 BLHELI32 35amp 6S MMCX is an FPV replacement electronics stack with an F4-class processor, 35A ESC rating and 6S-capable input. Its ESC-to-VTX component height is 22mm, and the new batch adds UART pads for receiver setups and third-party applications.

Request a quote ↗
EMAX Mini Magnum 2.5 F4 BLHELI32 35amp 6S MMCX electronics stack
EMAX Mini Magnum 2.5 F4 BLHELI32 35amp 6S MMCX electronics stack
Manufacturer and modelEMAX Mini Magnum 2.5 - F4 BLHELI32 35amp 6S MMCX
Product typeESC / Stack
SeriesMini Magnum 2
ConfigurationDefault configuration
SKUEMX-9087
Flight processorF4 class

Product overview

The EMAX Mini Magnum 2.5 - F4 BLHELI32 35amp 6S MMCX is an electronics stack intended for Mini Magnum 2 FPV flight-control replacement and AIO, ESC and VTX system service. Its control specification combines an F4-class flight processor with a 35A ESC rating and 6S-capable input. The product is designated as an ESC/stack in the Mini Magnum 2 series, with SKU EMX-9087 identifying the default configuration for procurement and replacement work.

The physical assembly has an ESC board and a VTX board, with a stated stack height of 22mm measured from the lowest component on the ESC board to the highest point on the VTX board. That measurement defines the vertical space occupied between those component extremes. The new batch adds UART pads for different receiver setups or third-party applications requiring an additional UART, making this connection provision specific to that batch.

Specifications

SpecificationValue & conditions
Manufacturer and modelEMAX Mini Magnum 2.5 - F4 BLHELI32 35amp 6S MMCX
Product typeESC / Stack
SeriesMini Magnum 2
ConfigurationDefault configuration
SKUEMX-9087
Flight processorF4 class
ESC firmware designationBLHELI32
ESC rating35A
Input voltage6S capable
Connector designationMMCX
Stack height22mmMeasured from the lowest component on the ESC board to the highest point on the VTX board.
Additional UART connectionsAdditional UART pads for different receiver setups or third-party applications requiring an additional UART.New batch.
Recommended useMini Magnum 2 FPV flight-control replacement and AIO / ESC / VTX system service.
SOURCE WITH CHINADRONE

Request a quote for EMAX Mini Magnum 2.5 - F4 BLHELI32 35amp 6S MMCX

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
GEPRC STABLE F411 three-layer electronics stack with red spacers
Flight control & navigation

STABLE F411

By GEPRC

The GEPRC STABLE F411 is a three-layer modular electronics stack for micro quads, combining an F411 flight controller, four-in-one 12A ESC and adjustable 5.8G video transmitter. It uses 16 × 16 mm mounting and supports 2–4S LiPo input. The full electronics package includes an antenna and XT30 cable.

EMAX Nanohawk AIO flight controller board with antenna and power connector lead
Flight control & navigation

EMAX Nanohawk Spare Parts - AIO Flight Controller

By EMAX

The EMAX Nanohawk Spare Parts - AIO Flight Controller is a replacement FrSky BNF electronics assembly combining flight control, ESC and video transmission. It incorporates an F4 controller, MPU6000 gyro, 5A Bl Heli S ESC and 25mW VTX, with 1S input and a choice of soldered or connector motor connections.