ChinaDrone.Request a quote ↗
COMPONENT

RadioLink AM32-70A

By RadioLink ↗

The RadioLink AM32-70A is a four-in-one UAV electronic speed controller built on the AM32 open-source architecture. It combines 2–6S lithium battery input, a 70A continuous current rating and PWM/Dshot control in a 52 × 48 mm package. Supplied hardware includes a connection cable and four vibration damping balls.

Request a quote ↗
RadioLink AM32-70A four-in-one electronic speed controller with power leads and yellow connector
RadioLink AM32-70A four-in-one electronic speed controller with power leads and yellow connector
Manufacturer and modelRadioLink AM32-70A
Product typeFour-in-one electronic speed controller
Firmware architectureAM32 open-source architecture
MicrocontrollerAM32 AT421 32-bit MCU
Intended aircraft size range3–22-inch aircraft
Battery support2–6SLithium battery input.

Product overview

The RadioLink AM32-70A is a four-in-one electronic speed controller intended for high-performance UAV propulsion systems. Its stated applications include racing aircraft, aerial photography platforms and industrial modifications, with an intended aircraft size range of 3–22 inches. The controller uses the AM32 open-source architecture and an AM32 AT421 32-bit MCU. It supports multiple sensorless brushless motor specifications and accepts PWM, Dshot300 and Dshot600 throttle signals, giving integrators several control options when assembling a propulsion system around a flight controller.

The hardware measures 52 × 48 mm, weighs 35.3g and uses a 30 × 30 mm mounting pattern, providing concrete dimensions for installation planning. Electrical integration requires a 2–6S lithium battery supply. The stated continuous current is 70A, while the 85A peak rating is limited to five seconds; current-sensing output is 7.5 mV/A. UART and TTL serial support are listed alongside a CAN interface upgrade option. The supplied package contains one ESC, one connection cable, four vibration damping balls and one packaging bag.

Specifications

SpecificationValue & conditions
Manufacturer and modelRadioLink AM32-70A
Product typeFour-in-one electronic speed controller
Firmware architectureAM32 open-source architecture
MicrocontrollerAM32 AT421 32-bit MCU
Intended aircraft size range3–22-inch aircraft
Battery support2–6SLithium battery input.
Continuous current70AContinuous operation.
Peak current85A5-second duration.
Current-sensing output7.5 mV/A
Serial interfacesUART and TTL serial support
CAN interfaceCAN interface upgrade supportedInterface upgrade.
Throttle protocolsPWM, Dshot300, Dshot600
Motor typeMultiple specifications of sensorless brushless motors
Dimensions52 × 48 mm
Mounting pattern30 × 30 mm
Weight35.3g
ESC quantity1 × RadioLink AM32-70A ESCIncluded equipment.
Connection cable1 × connection cableIncluded equipment.
Vibration damping accessories4 × FPV aircraft vibration damping ballsIncluded equipment.
Packaging1 × packaging bagIncluded equipment.
SOURCE WITH CHINADRONE

Request a quote for RadioLink AM32-70A

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
MAD Components V105 IPE V2.0(30p) 170KV drone motor with black housing and silver mounting hub
Motors & ESCs

V105 IPE V2.0(30p) EVTOL Drone Motor

By MAD Components

The MAD V105 IPE V2.0(30p) EVTOL Drone Motor is a 170KV propulsion component weighing 999g. Designed for payloads of 10-13kg per rotor with a 30″ carbon propeller, it delivers maximum thrust up to 30.4kg per rotor and incorporates centrifugal heat dissipation, IP35 protection and defined mounting interfaces.

Maytech MTO8085-160-G brushless motor with gold end cover, shaft, wires and mounting accessories.
Motors & ESCs

Maytech MTO8085-160-G Brushless Motor

By Maytech

The Maytech MTO8085-160-G is a non-sealed, sensorless brushless outrunner motor for aircraft, drones, and other electric-drive applications. Its 160 RPM/V configuration has a maximum output of 5330W and maximum pull of 15500g. Mechanical integration centers on an 80x74mm body, 1800g weight, and 12mm shaft.