ChinaDroneRequest a quote →

iFlight Borg F7 Stack (60 4-IN-1 ESC)

The iFlight Borg F7 Stack (60 4-IN-1 ESC) combines a flight controller for 5–10 inch FPV drones with a Borg 60 ESC and cable set. It features 4–6S LIHV battery support, integrated voltage-spike protection, remotely switchable VTX power and dual camera switching.

iFlightDrone motor
Weight
14g±1
Dimensions
37.5*37.5 mm±1
Input voltage
4-6S; Support LIHV battery

Get a free quote

Product overview

The iFlight Borg F7 Stack (60 4-IN-1 ESC) pairs a Borg F7 flight controller for 5–10 inch FPV drones with a Borg 60 ESC. The flight controller combines an STM32F722RET6 MCU, ICM42688 gyro, SPA06-003 barometer and AT7456E (LGA) OSD chip, with 32MB of Blackbox flash, six UARTs and four motor outputs. It accepts 4–6S batteries, including LIHV packs. Its 5V 2.5A and 12V 2A BEC outputs include remotely switchable 12V VTX power, while dual camera inputs allow camera selection from the remote controller.

The Borg 60 ESC accepts 4–6S power at DC 14–26.1V, supports LIHV batteries and has a maximum continuous current of 60A, with a 65A burst rating for 10 seconds. An integrated anti-spark circuit and TVS transient voltage suppressor protect against voltage spikes. High polymer capacitors remove the need for external capacitors in 5-inch racing models. FPC cables connect the flight controller to the ESC, with SH1.0 connectors on other interfaces. The package includes one flight controller, one ESC and one cable set. This stack is for recreational use only and does not support autonomous flight.

Motors & ESCsFlight control & navigation

Specifications

iFlight Borg F7 Stack (60 4-IN-1 ESC) specifications
SpecificationValue & conditions
Input voltage4-6S; Support LIHV batteryFlight controller.
MCUSTM32F722RET6Flight controller.
GyroICM42688Flight controller.
BarometerSPA06-003Flight controller.
OSD chipAT7456E (LGA)Flight controller.
Flash32MB (Blackbox flash)Flight controller.
UARTs6Flight controller.
Motor outputs4Flight controller.
Betaflight firmware targetIFLIGHT_BLITZ_F722Flight controller.
Mount pattern30.5*30.5φ4Flight controller.
Dimensions37.5*37.5mm±1Flight controller.
Weight14g±1Flight controller.
BEC5V 2.5A, 12V 2A (12V with VTX switch)Flight controller; 12V output with VTX switch.
Product nameBorg 60 ESCESC.
Input voltage4-6S(DC 14-26.1V); Support LIHV batteryESC.
Maximum continuous current60AESC.
Maximum burst current65A (10s)ESC; 10s burst.
MCUSTM32G071NESC.
DriverFD6288ESC.
FirmwareBL32 (32bit ESC)ESC.
Firmware targetIFLIGHT_BLITZ_G3 32.9ESC.
Current sensorYes(1/200)ESC.
Dimensions52*45.5mm±1ESC.
Mounting holes30.5*30.5φ4ESC.
Weight15.5g±1ESC.
ProtocolSupports DShot150/300/600, MultiShot, OneShot, etc.ESC.
Application and operating limitationBorg F7 flight controller for 5–10 inch FPV drones.
ESC protection and constructionIntegrated anti-spark circuit, TVS transient voltage suppressor and high polymer capacitors; no external capacitors required in 5-inch racing models.External capacitor elimination applies to 5-inch racing models.
Flight controller connections and switchingRemotely switchable 12V VTX power; FPC connections to ESCs; SH1.0 connectors on other interfaces; dual camera input with remote switching.
Supplied equipment and use limitationIncludes 1 x Borg F7 Flight Controller, 1 x Borg 60 ESC and 1 x Cable set. For recreational use only; does not support autonomous flight.

Related guides