Find aircraft and components for your next project.
The CUAV SKYE 2 Nano is a 15g DroneCAN airspeed sensor for UAV systems using ArduPilot or PX4 controllers. It combines a dual-wafer DLVR sensor, STM32F4 processor and aluminum alloy enclosure, with a 0–226.8km/h measurement range, 1% specified error and CUAV’s M4C software architecture.
The CUAV V5 nano is a flight controller intended for integration with vehicle power, navigation, radio control, telemetry and motor or servo outputs. The documented kit includes a power module, SBUS cable and installed SD card. This wiring-focused source establishes interface functions and installation constraints.
The CUAV V5+ flight controller provides power, actuator, receiver, GPS and telemetry connections for vehicle integration. Its documented kit includes a power module, safety switch, SBUS cable and factory-installed SD card. Procurement must account for mounting orientation, peripheral selection and wiring requirements.
The CUAV X25 EVO is a controller with redundant onboard inertial sensors.
The CUAV X25 MEGA Flight Controller is an industrial unmanned-system controller with a detachable core, redundant sensors and extensive actuator and communications interfaces. It supports ArduPilot and PX4 integration, offers configurations with or without a power module, and combines vibration protection, temperature compensation and conformal-coated circuitry.
The CUAV X25 SUPER is a compact industrial unmanned-system controller for aircraft and other robotic platforms. It combines redundant inertial sensing, an STM32H7 processor, ArduPilot/PX4 support and extensive actuator and communications interfaces. Supplied with PMU 2 Lite, it is an integration component rather than a complete flight platform.
The CUAV X7 is a flight controller covered by CUAV's X7 and X7+ wiring guide.
The CUAV X7+ Flight Controller combines an STM32H743 processor, three IMU sensor sets and a modular carrier-board design for academic research and commercial systems integration. It supports ArduPilot and PX4 firmware, provides 14 PWM outputs with Dshot on 12, and requires separate controller and servo power supplies.
The CUAV X7+ Pro Flight Controller combines an STM32H743 processor with ADIS16470 and RM3100 sensors and supports ArduPilot and PX4 firmware.
The CZI BS16 is a mobile charging and storage cabinet for industrial UAV batteries. Its detachable charging modules support several battery families, with capacity determined by module type. A 13.3-inch display, protective systems, auxiliary Type-C charging ports, and network-based battery data access support centralized battery management.
The CZI C30N is a drone-mounted dual-light night vision camera combining 4K visible imaging, high-resolution thermal imaging and an infinite-rotation gimbal. Its integrated configuration adds zoom, laser ranging, green laser guidance, infrared illumination and AI object counting for nighttime observation, search and rescue, and infrastructure-related operations.
The CZI CZ10 is a portable tethered hover lighting system with a 249g folding airside unit and a suitcase-style groundside unit. The complete system weighs 3.5kg and provides 16,000lm at 100W. Ground station controls, mobile app adjustments, RTK positioning and a groundside backup battery support deployment and operation.
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry