Find aircraft and components for your next project.
The DYS MB30010 is a multicopter electronic speed controller supplied with updated SimonK firmware. Its published configuration combines a separately heat-sinked MOS power stage, a 5V, 2A BEC and a 12g product weight. Procurement should account for its input range, continuous and burst current limits, product dimensions and pole-dependent motor-speed ceilings.
The DongYang (DYS) MB30020 is a multicopter electronic speed controller with updated SimonK firmware, 20A continuous output and a 25A burst rating limited to 10 seconds. Its published dimensions, 22g weight, DC input limits, 5V BEC and pole-dependent motor-speed limits provide the principal selection criteria for integration.
The DYS MB30030 is a multicopter electronic speed controller supplied with updated SimonK firmware, a separate power-stage heat sink and a 5V, 2A BEC. It supports 30A continuous output and 40A bursts lasting up to 10 seconds, with DC 6–16.8V input specified for 2–5S Lixx batteries.
The DYS MB30040, designated 40A HV ESC, is a multicopter speed controller supplied with updated SimonK firmware. Its 55 × 26 × 13mm, 39g package incorporates a separate MOS heat sink. It accepts DC 6–22.2V and supports 40A continuous output, with 60A bursts limited to 10 seconds.
The DYS MB30050, designated 50A SK ESC, is a multicopter speed controller supplied with updated SimonK firmware. It measures 68 × 27 × 10mm and weighs 40g, with 45A continuous output, 55A instantaneous output for 10 seconds, 7–26V DC input, 2–6S LiPo configuration and an OPTO BEC designation.
The DYS Mini F4 is a compact flight controller for integration with separate ESCs, combining an STM32F405 processor, six-axis sensing and OSD control. Its 30 × 27mm board uses 20 × 20mm mounting spacing and weighs 6g without cable. It supports Betaflight, 2–4S LiPo input and VTX control protocols.
The DYS MR1407 is a compact brushless motor intended for FPV racing, with a 4300 KV rating and 3–4S LiPo specification. It combines an imported NMB bearing, N52 magnet and 0.2mm lamination in a 14.66g motor body measuring Φ18.3 × 16.0mm. Stated thrust is 540g with a 3-inch propeller.
The DYS Osprey SX7V1 is a carbon-fibre FPV drone frame kit.
The SE2008 is a brushless motor for UAV use.
The DYS SE2205 is a brushless propulsion motor for FPV racing, offered in 2300KV and 2550KV versions. Its 30g body measures Φ27.7 × 19.0mm and supports 3–5S LiPo batteries. Construction includes an NMB bearing, N52 magnet and screw-retained hollow shaft; electrical limits and pull depend on the selected version and operating configuration.
The SE2205 PRO is a brushless motor for UAVs.
The DYS SF2207 is a propulsion motor with 1750KV, 2450KV and 2750KV configurations. Its current, pull and power figures depend on specific LiPo battery and propeller combinations at 16 V or 20 V.
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry
industry