Product overview
The DYS MB30010 is a motor-control component for multicopter integration, identified as a 10A electronic speed controller. The published configuration includes updated SimonK firmware, and the feature description names the dedicated tgy_debug multicopter program. Its power stage uses driver and high-power MOS components with a separate heat sink. A separate voltage-regulator IC serves the microprocessor, while the main control chip uses a high-stability crystal oscillator. A controller rather than a complete flight platform or an airframe kit.
Installation planning can use the published product size of 34 × 24 × 8mm, ordered as length, width and height, and the listed weight of 12g. These are product dimensions. Electrical integration is specified for DC 6–16.8V input with 2–4S Lixx batteries, alongside a 5V, 2A BEC. Output is rated at 10A continuously, with 12A permitted for bursts lasting up to ten seconds. These limits should guide selection for the intended configuration.
Motor selection also depends on the published speed ceilings: 210000 RPM for two poles, 70000 RPM for six poles and 35000 RPM for twelve poles. The stated startup safeguard prevents immediate motor operation when power is applied, regardless of throttle-stick position. Claims concerning low resistance, current endurance, battery protection, interference tolerance and control precision remain qualitative. Procurement should therefore against the stated electrical, dimensional and motor-speed requirements.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer | DYS / Dong Yang Model Technology Co., Ltd. |
| Product identification | MB30010; model: 10A ESC; category: speed controller |
| Continuous current | 10AContinuous output rating. |
| Burst current | 12ABurst output is limited to up to 10 seconds. |
| Input voltage | DC 6–16.8VSpecified with 2–4S Lixx input. |
| Battery cell configuration | 2–4S Lixx |
| BEC output | 5V, 2A |
| Product dimensions | 34 × 24 × 8mmProduct size is specified in length × width × height order. |
| Weight | 12g |
| Firmware configuration | SimonK updated firmwareSpecified as updated firmware for multicopter use. |
| Power-stage construction | Driver and high-power MOS components, with a separate heat sink for the MOS stage |
| PCB output resistance and current endurance | Extremely low PCB output resistance and claimed high current enduranceQualitative manufacturer claim. |
| Power-input design | Extremely low power-input resistance, with claimed improved power stability and a protective effect on the batteryQualitative manufacturer claims. |
| Power-on motor-start safeguard | Motor does not start immediately at power-onApplies at power-on regardless of throttle-stick position. |
| Microprocessor voltage regulation | Separate microprocessor voltage-regulator IC, with claimed anti-interference capabilityAnti-interference capability is a qualitative manufacturer claim. |
| Maximum motor speed: two poles | 210000 RPMMaximum supported speed for a two-pole motor. |
| Maximum motor speed: six poles | 70000 RPMMaximum supported speed for a six-pole motor. |
| Maximum motor speed: twelve poles | 35000 RPMMaximum supported speed for a twelve-pole motor. |
| Motor-control program | SimonK tgy_debugSpecified as a dedicated multicopter program. |
| Controller clock architecture | Main control chip with a high-stability crystal oscillatorImproved motor-control precision is a qualitative manufacturer claim. |
Request a quote for DYS MB30010 speed controller
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
