ChinaDrone.Request a quote ↗
COMPONENT

DYS MB30020 speed controller

By DYS ↗

The DongYang (DYS) MB30020 is a multicopter electronic speed controller with updated SimonK firmware, 20A continuous output and a 25A burst rating limited to 10 seconds. Its published dimensions, 22g weight, DC input limits, 5V BEC and pole-dependent motor-speed limits provide the principal selection criteria for integration.

Request a quote ↗
DYS MB30020 electronic speed controller with blue casing and attached wires.
DYS MB30020 electronic speed controller with blue casing and attached wires.
Manufacturer and product identityDongYang (DYS) MB30020
Product typeMB30020; 20A electronic speed controller
Output current20A continuous; 25A burst for up to 10 secondsContinuous output rating; burst output is limited to 10 seconds.
Input voltageDC 6–16.8V (2–5S Lixx)The manufacturer pairs this voltage range with the stated 2–5S Lixx designation.
BEC output5V, 2A
Product dimensions46mm × 26mm × 11mm (L × W × H)Dimensions are published in length × width × height order.

Product overview

The MB30020 is a 20A electronic speed controller for brushless motors in radio-controlled aircraft, including multicopters and fixed-wing models. Its multicopter configuration uses updated SimonK firmware and the dedicated tgy_debug program, together with a high-stability crystal oscillator for the main controller. The unit measures 46mm long, 26mm wide and 11mm high, and weighs 22g. Its power stage includes high-power MOS devices with a separate heat sink, while a separate voltage-regulator IC supplies the microprocessor.

The MB30020 accepts DC 6–16.8V input, with a stated battery designation of 2–5S Lixx, and includes a BEC rated at 5V and 2A. Continuous output is rated at 20A, while 25A burst operation is limited to up to 10 seconds. Maximum supported motor speeds depend on pole count: 210000 RPM for 2-pole motors, 70000 RPM for 6-pole motors and 35000 RPM for 12-pole motors. At power-on, the motor does not start immediately, regardless of throttle-stick position.

Specifications

SpecificationValue & conditions
Manufacturer and product identityDongYang (DYS) MB30020
Product typeMB30020; 20A electronic speed controller
Output current20A continuous; 25A burst for up to 10 secondsContinuous output rating; burst output is limited to 10 seconds.
Input voltageDC 6–16.8V (2–5S Lixx)The manufacturer pairs this voltage range with the stated 2–5S Lixx designation.
BEC output5V, 2A
Product dimensions46mm × 26mm × 11mm (L × W × H)Dimensions are published in length × width × height order.
Weight22g
Supplied firmwareUpdated SimonK firmware for multicoptersFirmware configuration for multicopter use.
Power-stage constructionDrive transistor and high-power MOS devices with a separate heat sink; PCB described as having extremely low output resistance and high current enduranceConstruction; resistance and current-endurance claims have no quantified measurements.
Power-input designInput described as having extremely low output resistance, with claimed power-stability and battery-protection benefitsBenefits.
Power-on motor-start behaviorMotor does not start immediately when power is turned onApplies at power-on regardless of throttle-stick position.
Microprocessor voltage regulationSeparate voltage-regulator IC for the microprocessor, with claimed interference resistanceArchitecture and interference-resistance claim.
Maximum motor speed: 2 poles210000 RPMPublished maximum supported motor speed for a 2-pole motor.
Maximum motor speed: 6 poles70000 RPMPublished maximum supported motor speed for a 6-pole motor.
Maximum motor speed: 12 poles35000 RPMPublished maximum supported motor speed for a 12-pole motor.
Control program and oscillatorSimonK tgy_debug multicopter program and a high-stability crystal oscillator for the main controllerControl configuration; the claimed precision improvement has no quantified result.
SOURCE WITH CHINADRONE

Request a quote for DYS MB30020 speed controller

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
FLUXER VTOL 24.1x9.6-inch carbon fiber propeller pair
Motors & ESCs

FLUXER VTOL 24.1x9.6 in Prop - 2Pcs

By MAD Components

The MAD FLUXER VTOL 24.1x9.6 in Prop - 2Pcs is a two-piece carbon fiber propeller set for VTOL propulsion. Its integrated structure, reinforced mounting positions and optimized blade profile target strength, durability and reduced cruise drag. The mounting option is D10-D20(M3*4) customize, with MAD brushless motors recommended for pairing.