60A ESCs
Compare 60A ESCs from Chinese manufacturers: single brushless speed controllers rated 60 A continuous, for FPV, fixed-wing and industrial drones.
60A ESCs only: single brushless electronic speed controllers rated 60 A continuous, for one motor each. 4-in-1 boards, stacks and AIO flight controllers are on their own pages.
Quick selection guide
FPV and fixed-wing
60A ESCs for 2S to 8S that drive one motor on large FPV builds, planes and VTOL drones.
Industrial multirotors
High-voltage 60A ESCs for 12S to 24S that drive heavy-lift and agricultural motors.
Retrofits and spares
Single ESCs that replace one failed channel without changing the whole power system.
60A ESCs for 12S to 24S industrial drones
View all 17 →60A ESCs for 12S to 24S packs on industrial and heavy-lift drones.
17 products from 5 manufacturers
ZHTAERO FLAME 60A 12S V2.0 ESC
HOBBYWING XRotor Pro H60A 14S BLDC
T-MOTOR V60A 24S FOC electronic speed controller
- Peak current
- 65 A
CKESC ROCK 60A 18S ESC
- Weight
- 112 g
60A ESCs up to 8S
View all 18 →60A ESCs for packs up to 8S, or with the range not stated in the listing name.
18 products from 12 manufacturers
Compare 60A ESCs specifications
Key figures for 10 of these products, as stated by each manufacturer, with their test conditions where given. Maximum, rated and cruise figures are listed separately.
| Model | Continuous current | Burst / peak current | Max current | Input voltage | Weight |
|---|---|---|---|---|---|
| Maytech MT60A-SBEC-FP32 Falcon Pro 32bit Firmware Brushless ESC | 60 A | 80 A | – | 2-6 cellsLiPo battery. | 58 g |
| T-MOTOR V60A 14S FOC ESC | 30 A | 60 A (10s)10s peak duration. | – | 6–14S LiPoLiPo input. | 63g (excluding cable) / 85g (with cable)Excluding cable / with cable, respectively. |
| GEPRC TAKER S60 BLS 60A ESC | 60 A | 65 A5 seconds | – | 3-6S Lipo | 57.2 gWith Case Version |
| HOBBYWING XRotor Pro H60A 14S FOC 2in1 ESC | 15 A × 2Requires good heat dissipation. | 60 A × 2 (3 s)Peak current specified for 3 seconds. | – | 6–14S (18–63 V) | 125.1 g (without wires)Weight excludes wires. |
| FlashHobby Spaceman 60A ESC | 60 AContinuous operation. | 80 ABurst duration ≤10 seconds. | – | – | 59.4 g |
| CKESC Breeze 60A-M FOC ESC | – | 80 AFor 3 seconds. | – | – | 76 gIncluding wiring. |
| MAD XROTOR Pro 60A (4-6S) Drone BLDC ESC | 60 A | – | – | – | 58.1 gWith wire. |
| T-MOTOR V60A 14S ESC | 30 A | 60 ADuration less than 10s. | 60 AFor 10 seconds. | – | 85 gIncluding cables. |
| HOBBYWING XRotor Pro H60A 14S BLDC | 25 AGood heat dissipation. | – | – | 6-14S (18-63 V)Standard BLDC configuration. | – |
| CKESC FLY 60A ESC | – | – | 65 A30-second duration. | – | 30 gIncluding wiring. |
What to check before you buy
- Continuous current
- Choose a continuous rating above the full-throttle current of your motor and propeller; 60 A should leave margin.
- Cell count
- Check the supported battery range (for example 3–6S or 12–14S) against your pack.
- Firmware and control
- Compare BLHeli_32, AM32, FOC and PWM or DShot input with your flight controller.
- BEC
- Check whether the ESC has a built-in BEC and what voltage and current it supplies.
- Cooling and size
- Compare weight, dimensions and heatsink or enclosure with the space in the arm or fuselage.
60A ESCs FAQ
Is a 60A ESC enough for my motor?
Compare the motor's maximum current at full throttle with your propeller; keep the ESC rating about 20% higher.
What is a FOC ESC?
Field-oriented control drives the motor with sine-like current: quieter, cooler and more efficient on large multirotors.
