Product overview
The HOBBYWING XRotor Pro H60A 14S FOC 2in1 is an electronic speed controller for integrating two motor channels into a UAV propulsion system. Its two independent outputs can drive two motors simultaneously, and the manufacturer identifies VTOL, coaxial and multirotor applications. The shared controller architecture is presented as a way to simplify installation and reduce wiring-space requirements. Procurement scope is therefore a propulsion-control component.
The physical assembly combines an aluminum-alloy case with a nano-coated circuit board. Published dimensions are 77 × 55 × 23 mm, subject to confirmation for the selected configuration, while the stated 125.1 g weight excludes wires. The protection rating is IP55, with IP67 identified as a custom configuration. Electrical sizing must retain the manufacturer's qualifications: continuous current is 15 A per channel with good heat dissipation, and the 60 A per-channel peak applies for three seconds.
Integration uses FOC vector control and listed CAN communication, with a serial port available as a custom configuration. Capacitor-temperature and other operating-data output to flight control, together with black-box storage for analysis. Motor matching requires attention because compatibility is stated as one motor, one program, and magnetic-encoder support is qualified for a custom motor. Isolated throttle signals and double throttle signals are listed, while throttle-travel calibration is unavailable. DataLinkBox G3 is the listed DataLink version; inclusion is not established.
Specifications
| Specification | Value & conditions |
|---|---|
| Product name | HOBBYWING XRotor Pro H60A 14S FOC (2in1 Version) |
| Product type and motor outputs | 2-in-1 electronic speed controller with two independent outputs for simultaneous operation of two motors. |
| Intended applications | VTOL drones, coaxial motor applications and multirotor applications.Applications; confirm the selected motor and aircraft configuration. |
| Wiring integration | Integrated architecture intended to reduce wiring-space requirements and simplify installation.Integration benefit; confirm installation requirements. |
| Enclosure and board protection | Aluminum-alloy case and nano-coated PCB provide the stated IP55 protection. |
| Operating-data output | Capacitor temperature and other operating data sent to flight control for monitoring, with black-box storage described for accident analysis.Data function; confirm flight-controller and logging integration. |
| Motor-control method | FOC vector control.Control features. |
| Input voltage | 6–14S (18–63 V) |
| Continuous current | 15 A × 2Requires good heat dissipation. |
| Peak current | 60 A × 2 (3 s)Peak current specified for 3 seconds. |
| Operating temperature | −20 °C to 50 °C |
| Compatibility | One motor, one programMotor-specific programming is stated; confirm the program for the selected motor. |
| Magnetic encoder | Yes (custom motor)Specified for a custom motor. |
| Waterproof rating | IP55 (custom IP67)IP55 is listed; IP67 requires a custom configuration. |
| Weight | 125.1 g (without wires)Weight excludes wires. |
| Size | 77 × 55 × 23 mm |
| Communication protocol | CAN (custom serial port)CAN is listed; serial-port communication requires a custom configuration. |
| Throttle-signal isolation | Isolated |
| PWM input signal level | 5 V / 3.3 V |
| Throttle signal frequency | 50–500 Hz |
| Operating pulse width | 1100–1940 µs |
| Throttle travel calibration | No |
| Specifications (unexplained source row) | NoNo explanation of this ambiguously named row; confirm its meaning for the selected configuration. |
| Double throttle signal | Yes |
| DataLink version | DataLinkBox G3 |
Request a quote for HOBBYWING XRotor Pro H60A 14S FOC 2in1
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
