Product overview
The GEPRC TAKER S60 BLS 60A ESC is a separate electronic speed controller offered in bare ESC and case-equipped configurations. It accepts 3-6S LiPo power and has a continuous current rating of 60A, with a 65A burst rating limited to five seconds. Control protocol support covers Dshot 150/300/600, while firmware compatibility includes BLHeli_S and BlueJay. Its cooling architecture incorporates a self-contained MOS heat sink for high-current operation. Ammeter functionality is not supported by either configuration.
Installation dimensions and weight depend on the selected configuration. The bare ESC measures 32.5x55mm and weighs 11.2g, with a mounting-hole specification of 29.6×48.5mm. The case-equipped version has the same ESC dimensions and mounting-hole specification, with a PC case measuring 36x76mm and a listed weight of 57.2g. Its custom-molded enclosure uses a hollow design for heat dissipation. These configuration-specific dimensions distinguish the ESC footprint from the space occupied by the enclosure.
Both configurations supply one TAKER S60 BLS 60A ESC and one 50V 2200μF capacitor. Wiring comprises one red and one black silicone wire, each 12AWG (3.4mm²) and 240mm long, plus a 150mm cable with a 2.54mm Dupont 2P single-end socket connector. The case-equipped package additionally includes black molded upper and lower enclosure parts. Eight M2*7 Grade 12.9 round-head hex-socket screws complete that package; the screws have black nickel plating and pre-applied glue.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | GEPRC TAKER S60 BLS 60A ESC |
| Configuration options | ESC; ESC (With Case Version) |
| Input voltage | 3-6S Lipo |
| Continuous current | 60A |
| Burst current | 65A5 seconds |
| Supported protocols | Dshot 150/300/600 |
| Ammeter support | Not supported |
| ESC dimensions | 32.5x55mmWith Case Version |
| Dimensions | 32.5x55mmESC version without case |
| Mounting holes | 29.6×48.5mm |
| Case material | PCWith Case Version |
| Case dimensions | 36x76mmWith Case Version |
| Weight | 57.2gWith Case Version |
| Weight | 11.2gESC version without case |
| Firmware compatibility | BLHeli_S and BlueJay |
| MOS cooling | Self-contained MOS heat sink |
| Case architecture | Custom-molded heat-dissipating case with a hollow designWith Case Version |
| Included ESC | 1 × TAKER S60 BLS 60A ESCBoth configuration options |
| Included capacitor | 1 × 50V 2200μF capacitorBoth configuration options |
| Included red wire | 1 × 12AWG (3.4mm²) red silicone wire, 240mmBoth configuration options |
| Included black wire | 1 × 12AWG (3.4mm²) black silicone wire, 240mmBoth configuration options |
| Included connector cable | 1 × 2.54mm Dupont line, 2P single-end socket connector cable, 150mmBoth configuration options |
| Included top case | 1 × black single ESC top case molded partWith Case Version |
| Included bottom case | 1 × black single ESC bottom case molded partWith Case Version |
| Included screws | 8 × Grade 12.9 round head hex socket screws, black nickel plated, M2*7, with pre-applied glueWith Case Version |
Request a quote for GEPRC TAKER S60 BLS 60A ESC
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
