ChinaDrone.Request a quote ↗
COMPONENT

V60A 14S

By T-MOTOR ↗

The T-MOTOR V60A 14S is a FOC electronic speed controller for UAV motor control, supporting PWM/CAN and 18~60V (6~14S). It measures 77 × 33 × 19mm and weighs 85g including cables. Ratings are 30A continuous and 60A for less than 10 seconds, with no BEC.

Request a quote ↗
T-MOTOR V60A 14S electronic speed controller with silver cooling fins and attached cables
T-MOTOR V60A 14S electronic speed controller with silver cooling fins and attached cables
ModelV60A 14S
Controller architectureFOC electronic speed controller
Dimensions77*33*19mm (L*W*H)
Weight85gIncluding cables.
Weight without cable63gExcluding cable.
Input cableRed/black silicone wire, 14AWG, 160mm

Product overview

The T-MOTOR V60A 14S is a FOC electronic speed controller for UAV motor control, supporting PWM and CAN protocols. It accepts 18~60V (6~14S) and has a continuous current rating of 30A. Peak current is 60A for durations of less than 10 seconds. The controller has no BEC. Its throttle position range is 1040~1940, with a throttle refresh frequency of 50~500Hz and a throttle response speed of 300ms. Standby consumption is ≤50mA at 48V.

The controller measures 77 × 33 × 19mm in length, width and height, and weighs 85g including cables or 63g excluding cable. Its cable configuration includes red/black 14AWG silicone input wiring measuring 160mm and orange 16AWG silicone output wiring measuring 60mm. The black shielded signal cable is specified as OD4.2, 5C, 300mm, with JP-3P*2 connections. A separate black shielded encoder cable uses 24AWG, 5C wiring, measures 300mm and has an M6 aviation connector.

Specifications

SpecificationValue & conditions
ModelV60A 14S
Controller architectureFOC electronic speed controller
Dimensions77*33*19mm (L*W*H)
Weight85gIncluding cables.
Weight without cable63gExcluding cable.
Input cableRed/black silicone wire, 14AWG, 160mm
Signal cableBlack shielded cable; OD4.2; 5C; 300mm; JP-3P*2; conductor description: Black Blank White-Green Yellow Gray
Encoder cableBlack shielded cable, 24AWG, 5C, 300mm, M6 aviation connector
Output cableOrange silicone wire, 16AWG, 60mm
Control protocolsPWM/CAN
Supported voltage18~60V (6~14S)
BECNo
Continuous current30A
Throttle position range1040~1940
Peak current60ADuration less than 10s.
Throttle refresh frequency50~500Hz
Standby consumption≤50mAAt 48V.
Throttle response speed300ms
SOURCE WITH CHINADRONE

Request a quote for V60A 14S

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
HOBBYWING RTF 5315 220KV brushless motor with visible copper windings, threaded shaft and attached wires.
Motors & ESCs

HOBBYWING RTF 5315

By HOBBYWING

HOBBYWING’s RTF 5315 is a brushless FPV drone motor offered in 220KV and 360KV configurations. Mechanical interfaces, wiring details and variant-specific electrical ratings, alongside recommended propeller, ESC and battery combinations. Procurement requires confirmation of package contents, dimensional units and operating configuration, particularly for time-limited maximum ratings.