Product overview
The Tatusky Technology Co., Ltd PA module 250W 10-600MHz RF power amplifier, item 01330, is a signal-source-equipped module for anti-FPV and counter-drone systems. Its physical integration envelope is less than 211x100 x 28 mm without connectors, with an SMA-F RF input and N-K RF output. The module operates across 10MHz-600MHz and specifies CW saturated output power of less than 250W. Input power is 3±1 dBm, with a maximum input of +10dBm; its specified gain is 253dB and in-band gain flatness is less than 4+1dB.
Electrical integration uses a through-core capacitor power port for the 48V supply, with a VCC supply reference of 48V/25A and maximum voltage of +50V. Working current is less than 20A. The PTT control leaves the amplifier off by default and enables it at 5V. Operating temperature spans -25℃~+55℃, temperature protection is specified at 80 degrees, and amplifier testing requires a heat sink. Additional RF specifications are input port standing wave less than 1.8, clutter suppression 265dBc and harmonic suppression 210dBc.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | PA module 250W 10-600MHz RF power amplifier |
| Manufacturer | Tatusky Technology Co., Ltd |
| Item number | 01330 |
| Product configuration and purpose | RF power amplifier module with signal source for anti-FPV and counter-drone systems |
| Operating frequency | 10MHz-600MHz |
| Gain | 253dB |
| Input power | 3±1 dBm |
| Maximum input | +10dBm |
| Output power | Less than 250WCW saturation. |
| In-band gain flatness | Less than 4+1dB |
| Temperature protection | 80 degree protection |
| Working current | Less than 20A |
| Input port standing wave | Less than 1.8 |
| Clutter suppression | 265dBc |
| Harmonic suppression | 210dBc |
| RF input interface | SMA-F |
| RF output interface | N-K |
| Power supply port | Through-core capacitor48V power supply. |
| Power amplifier PTT switch port | Power amplifier off by default; 5V on5V enables the power amplifier. |
| VCC power supply reference | 48V/25A |
| VCC maximum voltage | +50V |
| Overall dimensions | Less than 211x100 x 28 mmWithout connectors. |
| Operating temperature | -25℃~+55℃ |
| Installation requirement | A heat sink is requiredPower amplifier testing. |
Ask for the PA module 250W 10-600MHz RF power amplifier price ↑
