ChinaDroneRequest a quote →
Scorpion S-5535/5545 Motor Bearing Kit with three bearings in retail packagingScorpion S-5535/5545 Motor Bearing Kit with three bearings in retail packaging

Scorpion S-5535/5545 Motor Bearing Kit

The Scorpion S-5535/5545 Motor Bearing Kit provides three original equipment replacement bearings for all Scorpion S-5535 and S-5545 Series motors. Supplied as one rear bearing and two front bearings, the set offers an exact, snug fit in the motor housings for bearing replacement.

ScorpionMotors, ESCs & propellers
Weight
26.4 g

Get a free quote

Product overview

The Scorpion S-5535/5545 Motor Bearing Kit supplies three original equipment replacement bearings for servicing all Scorpion S-5535 and S-5545 Series motors. The set replaces the stock bearings with one rear bearing and two front bearings. The rear bearing measures 37mm OD x 30mm ID x 4mm thick; each front bearing measures 19mm OD x 8mm ID x 6mm thick. Weight including packaging is 26.4g. The kit does not fit Scorpion SII-5525/35 Series motors.

These replacement bearings provide a snug, exact fit in the motor housings and are intended to replace bearings that may become damaged after a crash or landing in dirt. Old bearings may require gentle tapping for removal. Install new bearings by pressing on the outer race. Do not tap them into place or apply pressure to the inner race: these actions can damage the bearings, dent the ball races or lead to premature failure.

Motors & ESCs

Specifications

Scorpion S-5535/5545 Motor Bearing Kit specifications
SpecificationValue & conditions
ProductScorpion S-5535/5545 Motor Bearing Kit
Replacement bearing setThree original equipment replacement bearingsFor all Scorpion S-5535 and S-5545 Series motors.
Bearing arrangementOne rear bearing and two front bearings
Rear bearing dimensions37mm OD x 30mm ID x 4mm thickRear bearing.
Front bearing dimensions19mm OD x 8mm ID x 6mm thickFront bearings.
Bearing fitExact, snug fitIn the motor housings.
Installation methodPress in by the outer race; never apply pressure to the inner race.When installing replacement bearings.
Installation restrictionDo not tap bearings into place; this can dent the ball races and ruin the bearings.When installing replacement bearings.
Compatibility exclusionDoes not fit Scorpion SII-5525/35 motor series.
Weight26.4gIncluding packaging.

Related guides