ChinaDroneRequest a quote →
GEPRC ELRS Nano 915M/2.4G Dual-Band Receiver with blue and teal label and white connectorGEPRC ELRS Nano 915M/2.4G Dual-Band Receiver with blue and teal label and white connector

GEPRC ELRS Nano 915M/2.4G Dual-Band Receiver

The GEPRC ELRS Nano 915M/2.4G Dual-Band Receiver is a compact ExpressLRS receiver supporting 915M and 2.4G operation. It combines dual LR1121 chips, a temperature-compensated crystal oscillator and WiFi firmware updates, and comes with a dual-band T-antenna, heat shrink tube, connection cable and user manual.

GEPRCRC transmitters & receivers
Operating voltage
5 V
Weight
0.95 g
Dimensions
11.1×20.4×5.2 mm

Get a free quote

Product overview

The GEPRC ELRS Nano 915M/2.4G Dual-Band Receiver brings ExpressLRS reception to a compact module measuring 11.1×20.4×5.2mm and weighing 0.95g for the receiver alone. Its electronics include ESP32-C3 and LR1121 chips, with dual LR1121 chips enabling switching between 915M and 2.4G when paired with 915M/2.4G antennas. The receiver works with existing 915M and 2.4G ELRS transmitter modules. Operating bands are 915MHz (FCC), 868MHz (EU) and 2.4GHz (ISM), with a refresh rate of 25Hz-1000Hz.

The receiver operates at 5V and provides 100mW telemetry power. A temperature-compensated crystal oscillator supports stable operation through temperature variations, while the built-in WiFi antenna enables wireless firmware updates. An SH1.0 connector simplifies installation, and the antenna connection uses ipex1. Firmware is GEPRC 900/2400 Single Dual-Band RX. The package supplies one receiver, one 915M/2.4G dual-band T-antenna, one heat shrink tube, one 4-pin silicone connection cable and one user manual.

Links & controllers

Specifications

GEPRC ELRS Nano 915M/2.4G Dual-Band Receiver specifications
SpecificationValue & conditions
ModelGEPRC ELRS Nano 915M/2.4G Dual-Band Receiver
Dimensions11.1×20.4×5.2mm
Weight0.95gReceiver only.
ChipsESP32-C3, LR1121
Crystal oscillatorTCXO
Frequency bands915MHz(FCC),868MHz(EU),2.4GHz(ISM)915MHz (FCC), 868MHz (EU), 2.4GHz (ISM).
Refresh rate25Hz-1000Hz
Operating voltage5V
Antenna connectorIpex1
Telemetry power100mW
FirmwareGEPRC 900/2400 Single Dual-Band RX
SystemDual-band receiver system developed from the ExpressLRS open-source project.
Band switchingDual LR1121 chips support switching between 915M and 2.4G.Paired with 915M/2.4G antennas.
Transmitter module compatibilityCompatible with existing 915M and 2.4G ELRS TX modules.
Firmware updatesWiFi firmware updates through a built-in WiFi antenna.
Installation connectorSH1.0 connector
Supplied equipment1 × ELRS Nano 915M/2.4G Dual-Band Receiver; 1 × 915M/2.4G dual-band T-antenna; 1 × heat shrink tube; 1 × 4-pin silicone connection cable; 1 × user manual.

Related guides