Scorpion HK-3536-510KV Motor
By ScorpionThe Scorpion HK-3536-510KV Motor is a brushless motor for 600 class electric helicopters with narrow motor frames. Supplied with connectors, heat shrink and M3 screws, it accommodates up to 12s LiPo and has a maximum continuous power rating of 2900 Watts. Installation requires suitable gear spacing, and bearings need regular lubrication and periodic replacement.
Explore product ↗industryScorpion HK-40 Motor Bearing Kit
By ScorpionThe Scorpion HK-40 Motor Bearing Kit is a pair of original equipment replacement bearings for Scorpion HK-40, HKIII-40 and HKIV-40 Series motors, excluding HK-4015. Each bearing measures 16mm OD × 8mm ID × 5mm thick. The snug-fitting bearings require installation pressure through the outer race.
Explore product ↗industryScorpion HK-4015 Motor Bearing Kit
By ScorpionThe Scorpion HK-4015 Motor Bearing Kit supplies two original-equipment replacement bearings for HK-4015 Series motors. Each measures 13mm outside diameter by 6mm inside diameter by 5mm thick. The bearings fit snugly into the motor housings and require installation pressure through the outer race.
Explore product ↗industryHK-4015 Shaft Kit (5mm)
By ScorpionThe Scorpion HK-4015 Shaft Kit (5mm) is a replacement component kit for HK-4015 helicopter motors. It supplies a 73.7mm-long, 6mm-diameter shaft with a 5mm output end, plus a washer and two C-clips. Installation involves a press-fit housing interface, while use in other brushless motors depends on matching shaft dimensions.
Explore product ↗industryScorpion HK-4015-1070KV
By ScorpionThe Scorpion HK-4015-1070KV is a brushless propulsion motor for 500 class electric helicopters with 425 to 450mm blades and an 8s LiPo setup. It combines a 215-gram motor with preinstalled bullet connectors and mounting hardware. Continuous limits are 65 Amps and 1900 Watts; propeller use requires a separate shaft adapter.
Explore product ↗industryScorpion HK-4015-1450KV
By ScorpionThe Scorpion HK-4015-1450KV is a brushless motor for 500-class electric helicopters with 425 to 450mm blades and 6s LiPo power. It combines an aluminum-alloy assembly with a stepped pinion-drive shaft. Supplied hardware includes connectors, heat shrink and M3 screws; propeller use requires a separate adapter.
Explore product ↗industryHK-4035 Shaft Kit (5mm 30mm)
By ScorpionThe Scorpion HK-4035 Shaft Kit (5mm 30mm) is a replacement motor-shaft assembly for HK-4035 series helicopter motors. It combines an 8mm shaft body with a 5mm pinion end and includes a washer and two C-clips. Installation work must account for the motor housing’s press fit.
Explore product ↗industryHK-4035 Shaft Kit (6mm 30mm)
By ScorpionThe Scorpion HK-4035 Shaft Kit (6mm 30mm) is a replacement motor component for HK-4035 helicopter motors. It supplies a hardened steel shaft with an 8mm body, a 6mm pinion end and a 94.7mm overall length, plus a washer and two C-clips. Installation involves a press-fit housing interface.
Explore product ↗industryHK-4035 Shaft Kit (8mm 30mm)
By ScorpionThe Scorpion HK-4035 Shaft Kit (8mm 30mm) supplies an 8mm-diameter, 94.7mm-long hardened steel replacement shaft, one washer and two C-clips for HK-4035 helicopter motors. Removing the shaft from Scorpion motors requires a bearing press or drill press and wooden-block support for the aluminum front housing.
Explore product ↗industryScorpion HK-42 Motor Bearing Kit
By ScorpionThe Scorpion HK-42 Motor Bearing Kit provides two original equipment replacement bearings for Scorpion HKII-4225 and HKII-4235 Series motors. Each measures 19mm OD × 8mm ID × 6mm thick. The bearings fit snugly in the motor housings and require installation pressure through the outer race.
Explore product ↗industryScorpion HK-45 / HK5-50 C-Clip Kit
By ScorpionThe Scorpion HK-45 / HK5-50 C-Clip Kit supplies factory replacement hardware for HK / HKII-45 Series helicopter motors, excluding HK-4526. Each kit contains four C-clips, four set screws and four washers, with a stated weight of 6g including packaging.
Explore product ↗industryScorpion HK-45 Motor Bearing Kit
By ScorpionThe Scorpion HK-45 Motor Bearing Kit is a two-bearing maintenance kit for Scorpion HK-45 Series motors, excluding the HK-4526. Its original equipment replacement bearings measure 19mm outside diameter by 10mm inside diameter by 5mm thick and require careful press installation.
Explore product ↗