GEP-STABLE V2 F4 35A
By GEPRCThe GEPRC GEP-STABLE V2 F4 35A is a compact UAV electronics stack combining an F4 flight controller, BLheli_32 four-in-one ESC and FPV video transmitter. It uses 20x20mm M2 mounting and supports 2-6s LiPo input at the ESC. Combined and individual component configurations are listed; this is integration hardware rather than a complete aircraft.
Explore product ↗industryGEP-TAKER F411-12A-E 1~2S AIO
By GEPRCThe GEPRC GEP-TAKER F411-12A-E 1~2S AIO is a compact flight control assembly for small Whoop and toothpick aircraft. It integrates an STM32F411 controller, ESC and ELRS2.4G 3.0 receiver in a 4.2g board. Supplied with a cable set, it supports LiPo/LiHv 1S-2S power and specifies 12A continuous ESC current.
Explore product ↗industryGEP-TAKER G4 35A AIO
By GEPRCThe GEPRC GEP-TAKER G4 35A AIO is a compact flight-controller and ESC board supplied with a cable set for UAV integration. Its 7.7g architecture combines a 170MHz G473 controller, ICM 42688-P IMU, Type-C USB and 35A continuous-current capability, with a 2–4S LiPo input requirement.
Explore product ↗industryGEP-TC18 Frame
By GEPRCThe GEPRC GEP-TC18 Frame is a compact Wide X UAV frame with an 87mm wheelbase and an 11.7g specified weight. It combines 1.5mm plates and arms with 7075 aluminum camera securing parts. Defined electronics mounts and rear space for a buzzer and dual video transmitter antennas support component integration; recommended electronics are separate from the frame configuration.
Explore product ↗industryGEP-TC18 O4 HD Frame
By GEPRCThe GEPRC GEP-TC18 O4 HD Frame is a Wide X UAV airframe for DJI O4 integration, with an 87mm wheelbase and 15g weight. It combines silicone camera damping, a 7075 aluminum camera mount and rear space for a buzzer and dual antennas. Component fit is bounded by defined mounting patterns and a 12mm stack mounting height.
Explore product ↗industryGEP-TG Frame
By GEPRCThe GEPRC GEP-TG Frame is a compact airframe kit for indoor UAV builds with an enclosure surrounding the propellers. It combines 79mm motor spacing, 14~19mm camera accommodation and specified controller and motor mounting interfaces. Supplied parts include a black canopy, black bottom plate, camera mount and assembly hardware.
Explore product ↗industryGEP-TKP16 Frame
By GEPRCThe GEPRC GEP-TKP16 Frame is a 10g airframe kit for compact indoor UAV builds, with an enclosure surrounding the propellers. Its 79mm motor spacing, camera accommodation and mounting provisions define component integration. Supplied parts include a canopy, bottom plate, camera mount and assembly hardware.
Explore product ↗industryGEP-Vapor D/ Vapor X O4 Pro Frame Parts
By GEPRCGEPRC GEP-Vapor D/ Vapor X O4 Pro Frame Parts is a selectable range of frame and mounting accessories for Vapor-D and Vapor-X O4 Pro frames and drones. Options cover camera upgrades, shock absorption, video-transmitter and antenna mounts, a side plate, and screw fittings.
Explore product ↗industryGEP-Vapor-D O4 Pro Frame
By GEPRCThe GEPRC GEP-Vapor-D O4 Pro Frame is a carbon-fiber airframe kit designed for DJI O4 Air Unit Pro aerial filming builds. Vapor-D5 and Vapor-D6 configurations recommend 5-inch and 6-inch propellers respectively. Both feature a DC layout, aluminum camera mounts, vibration-damping silicone, camera protection and multiple electronics mounting patterns.
Explore product ↗industryGEP-Vapor-X O4 Pro Frame
By GEPRCThe GEPRC GEP-Vapor-X O4 Pro Frame is a carbon fiber XH frame kit designed for DJI O4 Air Unit Pro integration. Vapor-X5 and Vapor-X6 versions support recommended 5-inch and 6-inch propellers respectively. Camera protection, vibration-damping silicone, multiple electronics mounting patterns and included assembly hardware define its build-focused configuration.
Explore product ↗industryGEP-VTX200-Whoop
By GEPRCThe GEPRC GEP-VTX200-Whoop is a 5.8GHz FPV video transmitter with 48 channels, selectable Pit/25/100/200mW output, PAL/NTSC support and IRC Tramp control. It weighs 2g without its antenna, requires 4.5V–5.3V input, and comes with an antenna and two cables.
Explore product ↗industryGEP-ZX5 Frame
By GEPRCThe GEPRC GEP-ZX5 Frame is a carbon and aluminum UAV airframe for racing and freestyle builds. Its 190MM square X layout supports recommended 5inch propellers, replaceable arms, an underside battery position and camera adjustment up to 60 degrees. Electronics and propulsion components are specified as build recommendations.
Explore product ↗