Product overview
The GEPRC GEP-STABLE V2 F4 35A provides flight control, four-in-one motor control and FPV video transmission as a compact electronics stack for integration into a UAV. Its F405 flight controller uses an SPI-connected MPU6000 gyro/accelerometer, BetaFlight OSD and an integrated LC filter, with no barometer. The BLheli_32 ESC accepts 2-6s LiPo input and specifies 35Amps continuous current, with a maximum 45A burst lasting three seconds. A current meter and several motor-control protocols support integration.
Installation requires attention to each board’s footprint: the flight controller measures 26x26mm, the ESC reaches 31*31mm including power pads, and the VTX measures 24 * 26 mm. The stack specifies 20x20mm M2 mounting and a 26x26x21mm overall size. Combined and individual component options are listed, including pin-connected and wire-connected VTX versions. The combined equipment list includes wiring, antenna, capacitor, screws and silicone pieces. Its VTX is identified as 500mW in that list, while the detailed VTX specification provides settings through 600mW.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | GEPRC GEP-STABLE V2 F4 35A |
| Listed weight | 150 g |
| Configuration options | ESC +FC +VTX, ESC, FC, VTX (Pin-Connected Version), VTX (Wire-Connected Version) |
| Flight controller model | STABLE F4 35A |
| Flight controller MCU | F405 |
| Flight controller IMU | MPU6000 gyro/accelerometer (SPI) |
| Flight controller OSD | BetaFlight OSD with AT7456E chip |
| Flight controller BEC output | 5V@3A |
| Flight controller firmware target | OmnibusF4SD |
| Flight controller dimensions and mounting | 26x26mm board, 20mm mounting holes (M2) |
| ESC MCU | STM32F051 |
| ESC battery input | 2-6s LiPo |
| ESC continuous current | 35Amps |
| ESC burst current | 45AmpsMaximum current duration: 3 seconds. |
| ESC dimensions | 31*31mmIncluding the power pads. |
| ESC mounting holes | 20*20mm, M2 |
| ESC firmware target | GEPRC-BL32-4IN1 |
| VTX input voltage | 5V |
| VTX channel count | 48 |
| VTX transmission power settings | 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 600mW0mW is Pit mode. |
| VTX dimensions | 24 * 26 mm |
| VTX mounting hole spacing | 20mm x 20mm |
| VTX BEC output | 5V/1AFor Camera of FC. |
| VTX weight | 2.3g |
| Stack mounting holes | 20x20mm(M2) |
| Stack dimensions | 26x26x21mm |
| Stack weight | 16.5gIncluding wire and screws. |
| Flight controller sensing and filtering | No barometer; integrated LC filter |
| ESC and VTX interfaces | ESC: Dshot1200, Proshot, Oneshot and Multishot support; current meter. VTX: MMCX connector, button control and IRC Tramp protocol. |
| Included equipment | 1 F4 flight controller; 1 BLheli_32 35A 2-6S ESC; 1 5.8 GHz VTX identified as 500mW; 1 antenna; 1 capacitor; 5 cable sets; 4 M2*28mm screws; 16 soft silicone pieces.Listed combined equipment package. |
Request a quote for GEP-STABLE V2 F4 35A
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
