Product overview
The GEPRC TAKER F405 20A ELRS2.4G 2–4S AIO is an integrated flight-control electronics assembly for 1.6–2.2-inch micro FPV builds. Its architecture combines an STM32 F405 BGA processor, an ICM42688-P gyroscope using SPI, a built-in ELRS 2.4GHz receiver and Bluejay ESC functionality. The board measures 31.5mm × 31.5mm and weighs 7g, giving builders a compact assembly to accommodate within the aircraft. Installation uses a 25.5 × 25.5mm mounting pattern with M3 rubber grommets adapting to M2 screws.
Peripheral integration is supported by five full UART ports and a separate R2 connection in the listed pin arrangement. A six-pin connector underneath the flight controller supports direct connection of various HD digital video transmitters, reducing soldering work for those connections. USB access uses an SH1.0 six-pin connection to Type-C, while the BEC provides 5V at 2.5A. Betaflight OSD uses an AT7456E chip, and the board also provides 16Mb onboard blackbox flash, OSD tuning, buzzer support and LED support.
Power input is specified for 2–4S LiPo batteries. The ESC rating is 20A continuous, with a 25A peak limited to 10 seconds; supported control protocols are DShot600, OneShot and MultiShot. The listed package contains one AIO, an XT30 18AWG 7cm power cable, a 35V 220µF capacitor, three connection cables, a Type-C configuration board and eight black mounting grommets. The selectable options are AIO and Type-C Configuration Board. This is a flight-control electronics component for integration into a build.
Specifications
| Specification | Value & conditions |
|---|---|
| Product name | GEPRC TAKER F405 20A ELRS2.4G 2–4S AIO |
| Options | AIO, Type-C Configuration Board |
| MCU | STM32 F405 BGA |
| Gyroscope | ICM42688-P (SPI) |
| FC firmware | GEPRC_TAKER_F405 AIO |
| Blackbox | 16Mb onboard flash |
| OSD | Betaflight OSD with AT7456E chip |
| UART connections | R1-T1 / R2 / R3-T3 / R4-T4 / R5-T5 / R6-T6 |
| USB | SH1.0 6-Pin connector to Type-C USB |
| BEC output | 5V @ 2.5A |
| ESC firmware | Bluejay 20A |
| Continuous current | 20A |
| Peak current | 25A (10 seconds)10 seconds. |
| Input voltage | 2–4S LiPo |
| ESC protocols | DShot600, OneShot, MultiShot |
| Dimensions | 31.5mm × 31.5mm |
| Mounting pattern | 25.5 × 25.5mm, φM3 rubber grommets to M2 screws |
| Weight | 7g |
| Integrated receiver | Built-in ELRS 2.4GHz receiver |
| Intended build size | 1.6–2.2-inch FPV drones |
| Full UART ports | 5 |
| HD digital VTX connection | Bottom-mounted 6-pin connector for direct connection of various HD digital VTX systems |
| Buzzer support | Yes |
| LED support | Yes |
| OSD tuning | Supported |
| Supplied AIO | 1 × TAKER F405 20A ELRS2.4G 2–4S AIOIncluded equipment. |
| Power cable and capacitor | 1 × XT30 18AWG 7cm power cable; 1 × 35V 220µF capacitorIncluded equipment. |
| Connection cables | 1 × 60mm SH1.0 6-Pin dual-ended cable; 1 × SH1.0 6-Pin cable; 1 × 60mm SH1.0 5-Pin dual-ended cableIncluded equipment. |
| Configuration board | 1 × Type-C Configuration BoardIncluded equipment. |
| Mounting grommets | 8 × M2×6.5mm FC rubber grommets (black)Included equipment. |
Request a quote for GEPRC TAKER F405 20A ELRS2.4G 2~4S AIO
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
