Product overview
The GEPRC GEP-STABLE V2 F4 30A provides flight control, motor control and FPV video transmission as an electronics stack for UAV integration. Its F405 flight controller pairs an SPI-connected MPU6000 gyro/accelerometer with BetaFlight OSD using an AT7456E chip. It includes an LC filter and a 5V@3A BEC, uses the OmnibusF4SD firmware target and has no barometer. Installation requires space for the 26x26mm flight controller board and the ESC’s 31*31mm footprint, including power pads. Both use 20mm M2 mounting.
The combined configuration supplies an F4 flight controller, BLheli_s 30A 2-5S ESC, 5.8 GHz 600mW VTX, antenna, capacitor, five cable sets, four M2*28mm screws and sixteen soft silicone pieces. Individual ESC, flight controller and VTX configurations are also offered. The 4-in-1 ESC accepts 2-5S LiPo input, with 30Amps continuous and 35Amps burst ratings. The 5V VTX provides 48 channels and six power settings from 0mW Pit mode through 600mW. Its 24 * 26 mm board uses 20mm x 20mm mounting, an MMCX antenna connector, button control and IRC Tramp.
Specifications
| Specification | Value & conditions |
|---|---|
| Product weight | 150 g |
| Configuration options | ESC +FC +VTX, ESC, FC, VTX |
| Model | STABLE F4 30AFlight controller. |
| MCU | F405Flight controller. |
| IMU | MPU6000 gyro/accelerometer (SPI)Flight controller. |
| OSD | BetaFlight OSD w/ AT7456E chipFlight controller. |
| BEC output | 5V@3AFlight controller. |
| Firmware target | OmnibusF4SDFlight controller. |
| Board size and mounting | 26x26mm board, 20mm mounting holes (M2)Flight controller. |
| Battery input | 2-5s lipo4-in-1 ESC. |
| Continuous current | 30Amps4-in-1 ESC. |
| Burst current | 35Amps4-in-1 ESC. |
| Dimensions | 31*31mm(including the power pads)4-in-1 ESC; including the power pads. |
| Mounting holes | 20*20mm,M24-in-1 ESC. |
| Firmware target | G_H_304-in-1 ESC. |
| Input voltage | 5V5.8 GHz video transmitter. |
| Channel count | 485.8 GHz video transmitter. |
| Transmission power settings | 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 600mW5.8 GHz video transmitter; 0mW is Pit mode. |
| Board size | 24 * 26 mm5.8 GHz video transmitter. |
| Mounting hole spacing | 20mm x 20mm5.8 GHz video transmitter. |
| BEC output | 5V/1A for Camera of FC5.8 GHz video transmitter; for Camera of FC. |
| Weight | 2.3g5.8 GHz video transmitter. |
| Barometer | NoFlight controller. |
| Supported control protocols | Dshot600, Proshot, Oneshot, Multishot4-in-1 ESC. |
| Current meter | Yes4-in-1 ESC. |
| Antenna connector and controls | MMCX connector; traditional button; IRC Tramp protocol5.8 GHz video transmitter. |
| Included equipment | 1 x F4 flight controller; 1 x BLheli_s 30A 2-5S ESC; 1 x 5.8 GHz 600mW VTX; 1 x antenna; 1 x capacitor; 5 x cable sets; 4 x M2*28mm screws; 16 x soft silicone piecesCombined F4 flight controller, ESC and VTX configuration. |
| Power filtering | Integrated LC filterFlight controller. |
Request a quote for GEP-STABLE V2 F4 30A
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
