Product overview
The GEPRC GEP-TC18 O4 HD Frame is an airframe for a compact UAV build with DJI O4 digital video integration. Its Wide X architecture measures 100*90mm with an 87mm wheelbase and a weight of 15g. The structure uses a 1.5mm top plate, a 2mm bottom plate and 2mm arms. A 7075 aluminum camera mount provides the camera support, while silicone damping is intended to reduce shake in O4 footage. The integrated rear section reserves room for a buzzer and dual antennas.
Component installation has a 12mm stack mounting height and a 14*14mm camera side plate gap. Flight controller and video transmitter mounting holes are 25.5*25.5/M2; motor mounting holes are 6.6*6.6/M1.4. Recommended accessories are 0802-1002 motors, a TAKER F411-12A-E 1~2S AIO flight controller, a DJI O4 Air Unit digital VTX and HQprop 45mm propellers. Procurement options include the frame, DJI O4 camera module housing kit, individual plates, camera aluminum mount, rear fixed aluminum standoff, rear 3D-printed part, anti-slip pad, camera silicone pad and screw pack.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEP-TC 18 O4 frame |
| Product configuration | UAV airframe |
| Wheelbase | 87mm |
| Dimensions | 100*90mm |
| Frame type | Wide X |
| Top plate thickness | 1.5mm |
| Bottom plate thickness | 2mm |
| Arm thickness | 2mm |
| Flight controller mounting holes | 25.5*25.5/M2 |
| Video transmitter mounting holes | 25.5*25.5/M2 |
| Motor mounting holes | 6.6*6.6/M1.4 |
| Camera side plate gap | 14*14mm |
| Stack mounting height | 12mm |
| Weight | 15g |
| Camera damping | Silicone damping intended to reduce camera shakeFor use with O4. |
| Camera mount material | 7075 aluminum |
| Rear integration space | Integrated rear design with space reserved for a buzzer and dual antennas |
| Motor | 0802-1002Recommended accessory configuration. |
| Flight controller | TAKER F411-12A-E 1~2S AIO FCRecommended accessory configuration. |
| Video transmitter | DJI O4 Air Unit digital VTXRecommended accessory configuration. |
| Propeller | HQprop 45mmRecommended accessory configuration. |
| Options | TC18 O4 HD Frame, DJI O4 Air Unit Camera Module Housing Kit, Bottom Plate, Top Plate, Camera Aluminum Mount, Rear Fixed Aluminum Standoff, Rear 3D-Printed Part, Anti-Slip Pad, Camera Silicone Pad, Screw PackSelectable frame and component configurations. |
Request a quote for GEP-TC18 O4 HD Frame
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
