Product overview
The GEPRC GEP-Vapor-X O4 Pro Frame provides a carbon fiber XH airframe for builds centered on the DJI O4 Air Unit Pro. Its camera assembly combines redesigned aluminum mounting parts with vibration-damping silicone, while camera guard side panels and a front lip provide physical protection. A quick-release design supports repair and maintenance. At the rear, the antenna mount accommodates the original O4 Pro antenna or SMA adapters, giving builders two specified antenna mounting arrangements.
The Vapor-X5 has a 230mm wheelbase, a 5-inch propeller recommendation and a weight of 206±5g; the Vapor-X6 has a 254.5mm wheelbase, a 6-inch recommendation and a weight of 214.1±5g. Both provide multiple flight-controller and video-transmitter mounting patterns, with 16x16mm motor mounts and 19mm / 20mm camera mounting sizes. Each is supplied as a frame kit with battery straps, silicone pads, screws, a printout package, three L-shaped screwdrivers and an M8 wrench. Flight electronics and propulsion are outside the listed kit contents.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and product | GEPRC GEP-Vapor-X O4 Pro Frame |
| Options | Vapor-X5, Vapor-X6 |
| Intended integration | Designed specifically for the DJI O4 Air Unit Pro |
| Frame material and architecture | High-strength carbon fiber frame with XH structure |
| Camera mounting and damping | Redesigned aluminum camera parts and vibration-damping silicone |
| Camera protection | Camera guard side panels and front lip |
| Maintenance architecture | Quick-release design |
| Rear antenna mount | Supports the original O4 Pro antenna and SMA adapters |
| Model | GEP-Vapor-X5 O4 Pro FrameVapor-X5 configuration. |
| Wheelbase | 230mmVapor-X5 configuration. |
| Top plate thickness | 2.0mmVapor-X5 and Vapor-X6 configurations. |
| Middle plate thickness | 2.0mmVapor-X5 and Vapor-X6 configurations. |
| Arm thickness | 5.0mmVapor-X5 configuration. |
| Bottom plate thickness | 2.5mmVapor-X5 and Vapor-X6 configurations. |
| FC mounting hole size | 20x20mm / 30.5×30.5mmVapor-X5 and Vapor-X6 configurations. |
| VTX mounting hole size | 20x20mm / 25x25mm / 30.5×30.5mmVapor-X5 and Vapor-X6 configurations. |
| Motor mounting hole size | 16x16mmVapor-X5 and Vapor-X6 configurations. |
| Camera mounting hole size | 19mm / 20mmVapor-X5 and Vapor-X6 configurations. |
| Recommended propeller | 5-inchVapor-X5 configuration. |
| Weight | 206±5gVapor-X5 configuration. |
| Model | GEP-Vapor-X6 O4 Pro FrameVapor-X6 configuration. |
| Wheelbase | 254.5mmVapor-X6 configuration. |
| Arm thickness | 5.0mVapor-X6 configuration. |
| Recommended propeller | 6-inchVapor-X6 configuration. |
| Weight | 214.1±5gVapor-X6 configuration. |
| Supplied frame kit | 1 x GEP-Vapor-X5 O4 Pro Frame; 2 x M20*250mm battery straps; 2 x battery silicone pads; 1 x set of screws; 1 x printout package; 1 x L-shaped screwdriver each in 1.5mm, 2mm and 3mm; 1 x M8 wrenchVapor-X5 configuration. |
| Supplied frame kit | 1 x GEP-Vapor-X6 O4 Pro Frame; 2 x M20*250mm battery straps; 2 x battery silicone pads; 1 x set of screws; 1 x printout package; 1 x L-shaped screwdriver each in 1.5mm, 2mm and 3mm; 1 x M8 wrenchVapor-X6 configuration. |
Request a quote for GEP-Vapor-X O4 Pro Frame
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
