CUAV HV_PM Power Module
By CUAVThe CUAV HV_PM is a power module developed for CUAV V5 series controllers.
Explore product ↗industryCUAV LBA 3 Base Station
By CUAVThe CUAV LBA 3 is an LTE based communications base station for unmanned systems.
Explore product ↗industryCUAV NEO 3 Pro GNSS Module
By CUAVThe CUAV NEO 3 Pro is a GNSS module with a u-blox M9N receiver.
Explore product ↗industryCUAV NEO 3X GNSS Module
By CUAVThe CUAV NEO 3X GNSS Module is a compact UAV navigation component combining a u-blox M9N receiver, electronic compass, barometer and STM32F412 processor. It supports four concurrent satellite systems, DroneCAN communication and RGB status indication. Its IP66 structure and plug support rainy operating conditions, within specified voltage and temperature limits.
Explore product ↗industryCUAV NEO 4 GNSS Module
By CUAVThe CUAV NEO 4 GNSS Module combines a u-blox M10 receiver, IIS2MDC compass and DroneCAN interface for unmanned-system integration. Its compact housing incorporates RGB status lights and a buzzer, with two mounting options. It supports four concurrent GNSS, ArduPilot and PX4, while requiring a 4.7–5.2 V supply; IP67 protection is qualified as install on demand.
Explore product ↗industryCUAV NEO 4 Nano GNSS Module
By CUAVThe CUAV NEO 4 Nano GNSS Module is a miniature navigation component for unmanned systems, combining a u-blox M10 receiver, STM32H5 processor and electronic compass. Its 10.6 g body supports compact installations, while DroneCAN connects it to supported autopilot stacks. Four-system reception, configurable navigation rates and integrated status indicators define its main integration capabilities.
Explore product ↗industryCUAV NEO 4 SE GNSS Module
By CUAVThe CUAV NEO 4 SE GNSS Module is a compact satellite navigation component integrating a u‑blox M10 receiver, STM32H5 processor, electronic compass and status controls. Its DroneCAN interface supports ArduPilot and PX4 integration. The 33 g module receives four GNSS concurrently, with update rates dependent on the selected GNSS configuration.
Explore product ↗industryCUAV Nora flight controller
By CUAVThe CUAV Nora is a flight controller with connections for positioning, telemetry and motor or servo control.
Explore product ↗industryCUAV Nora+ flight controller
By CUAVThe CUAV Nora+ is a compact UAV flight controller for academic research and commercial systems integration. It combines STM32H7 processing, three IMU sensor sets, internal shock absorption and extensive control and peripheral interfaces. Controller power enters through Power A, Power C or USB; the PWM rail is electrically separate, and RCIN is restricted to receiver power.
Explore product ↗industryCUAV P8 Radio Telemetry
By CUAVCUAV P8 Radio Telemetry is a compact data-link module for unmanned systems, offered as a radio set or individual air and ground units. It combines interchangeable terminal roles, TTL and USB connectivity, and an aluminum enclosure. Specifications distinguish a 40km limit distance from a 25km reference distance and list a maximum 345kbps over-air rate.
Explore product ↗industryCUAV P9 Radio Telemetry
By CUAVThe CUAV P9 Radio Telemetry is an unmanned-system data-link module with switchable air and ground roles, point-to-point and relay networking, and a link rate up to 276kbps. Its reference range is 40km, subject to environment and configuration. An aluminum enclosure, serial and USB interfaces, and stated 3S–12S battery support define its integration.
Explore product ↗industryCUAV Pihack V3X Flight Controller
By CUAVThe Pihack V3X is listed in CUAV’s controller family for civilian drone systems.
Explore product ↗