Drone components from China

The PMU 2s is an optional power module for the X25 SUPER.

CUAV SKYE 2 airspeed sensor with black housing and integrated probe.

The CUAV SKYE 2 Airspeed Sensor is an integrated airspeed measurement unit for unmanned systems, combining a pitot tube, environmental sensing, and controlled de-icing with drainage. Its compact body communicates through DroneCAN and supports ArduPilot and PX4. The default supply range is 18–68V; IP54 protection requires installation on request.

CUAV SKYE 2 Nano Airspeed Sensor

The CUAV SKYE 2 Nano is an airspeed sensor for unmanned systems.

CUAV SKYE 2 Nano DroneCAN Airspeed Sensor

The CUAV SKYE 2 Nano is a 15g DroneCAN airspeed sensor for UAV systems using ArduPilot or PX4 controllers. It combines a dual-wafer DLVR sensor, STM32F4 processor and aluminum alloy enclosure, with a 0–226.8km/h measurement range, 1% specified error and CUAV’s M4C software architecture.

CUAV V5 nano flight controller

The CUAV V5 nano is a flight controller intended for integration with vehicle power, navigation, radio control, telemetry and motor or servo outputs. The documented kit includes a power module, SBUS cable and installed SD card. This wiring-focused source establishes interface functions and installation constraints.

CUAV V5+ flight controller

The CUAV V5+ flight controller provides power, actuator, receiver, GPS and telemetry connections for vehicle integration. Its documented kit includes a power module, safety switch, SBUS cable and factory-installed SD card. Procurement must account for mounting orientation, peripheral selection and wiring requirements.

CUAV X25 EVO Flight Controller

The CUAV X25 EVO is a controller with redundant onboard inertial sensors.

CUAV X25 MEGA Flight Controller

The CUAV X25 MEGA Flight Controller is an industrial unmanned-system controller with a detachable core, redundant sensors and extensive actuator and communications interfaces. It supports ArduPilot and PX4 integration, offers configurations with or without a power module, and combines vibration protection, temperature compensation and conformal-coated circuitry.

CUAV X25 SUPER flight controller

Explore product ↗industry

The CUAV X25 SUPER is a compact industrial unmanned-system controller for aircraft and other robotic platforms. It combines redundant inertial sensing, an STM32H7 processor, ArduPilot/PX4 support and extensive actuator and communications interfaces. Supplied with PMU 2 Lite, it is an integration component rather than a complete flight platform.

CUAV X7 flight controller

The CUAV X7 is a flight controller covered by CUAV's X7 and X7+ wiring guide.

CUAV X7+ Flight Controller

The CUAV X7+ Flight Controller combines an STM32H743 processor, three IMU sensor sets and a modular carrier-board design for academic research and commercial systems integration. It supports ArduPilot and PX4 firmware, provides 14 PWM outputs with Dshot on 12, and requires separate controller and servo power supplies.