ChinaDroneRequest a quote →

SkyMEMS IMU20 6dof IMU

The SkyMEMS IMU20 6dof IMU is a compact, fully calibrated MEMS inertial measurement unit integrating three-axis accelerometers and gyroscopes. It provides acceleration and angular-rate measurements for unmanned aircraft, robotics, AGVs and stabilization systems, with SPI or UART connectivity in a 15 x 15 x 5mm package weighing less than 3grams.

SkyMEMSIMU sensors
Applications
Unmanned vehicles, smart agriculture, unmanned aircraft, ROVs, robotics control, AGVs, drones, machine control, platform stabilization and antenna pointing
Weight
Less than 3grams
Dimensions
15 x 15 x 5 mm

Get a free quote

Product overview

The SkyMEMS IMU20 combines three-axis MEMS accelerometers and three-axis gyroscopes in a fully calibrated inertial measurement unit. Its processing incorporates A/D conversion, digital filtering, temperature compensation and rate-table inertial calibration to deliver three-axis acceleration and angular-rate data. Applications include unmanned aircraft, ROVs, unmanned ground vehicles, robotics, AGVs and smart agriculture, together with machine control, platform stabilization and antenna pointing. The accelerometers cover -6g to +6g on each axis, while the gyroscopes measure angular rates from -400°/s to +400°/s.

Glue encapsulation forms part of the IMU20’s compact construction, with dimensions of 15 x 15 x 5mm and a weight below 3grams. The unit uses a 3.3VDC supply, consumes less than 0.15W and offers SPI or UART interface options. Its operating temperature range is -40~+85°C, with storage supported at -55~+100°C. Both sensor groups have 50Hz bandwidth. Before temperature compensation and turntable calibration, the module undergoes 48 hours of environmental stress screening in a high- and low-temperature chamber.

Flight control & navigationCameras & sensors

Specifications

SkyMEMS IMU20 6dof IMU specifications
SpecificationValue & conditions
ProductSkyMEMS IMU20 6dof IMU; precision six-degree-of-freedom MEMS inertial measurement unit
Integrated sensorsThree-axis MEMS accelerometers and three-axis gyroscopes
Signal processing and calibrationSignal processing, A/D conversion, digital filtering, temperature compensation and rate-table inertial calibration; three-axis acceleration and three-axis angular-rate output
ConstructionGlue-encapsulated construction; fully calibrated
ApplicationsUnmanned vehicles, smart agriculture, unmanned aircraft, ROVs, robotics control, AGVs, drones, machine control, platform stabilization and antenna pointing
Gyroscope range-400°/s to +400°/s
Gyroscope bias instability2°/h / 3°/h / 4°/hMinimum / typical / maximum, respectively.
Gyroscope bias stability0.08°/s / 0.1°/s / 0.2°/sFull temperature range; minimum / typical / maximum, respectively.
Gyroscope resolution0.01°/s
Gyroscope non-linearity0.1%FS
Gyroscope cross-axis sensitivity0.1%FS
Gyroscope random walk0.2º/√hr / 0.3º/√hr / 0.5º/√hrMinimum / typical / maximum, respectively.
Gyroscope bandwidth50Hz
Accelerometer range-6g to +6gX, Y and Z axes.
Accelerometer bias instability5μg / 10μg / 15μgMinimum / typical / maximum, respectively.
Accelerometer bias stability3mg / 4mg / 5mgFull temperature range; minimum / typical / maximum, respectively.
Accelerometer resolution0.5mg
Accelerometer non-linearity0.1%FS
Accelerometer cross-axis sensitivity0.1%FS
Accelerometer random walk0.03m/s/√hr / 0.05m/s/√hr / 0.07m/s/√hrMinimum / typical / maximum, respectively.
Accelerometer bandwidth50Hz
Operating temperature-40~+85°C
Storage temperature-55~+100°C
Input power supply3.3VDC
Power consumptionLess than 0.15W
InterfaceSPI / UARTOptional interface selection.
Dimensions15 x 15 x 5mm
WeightLess than 3grams
Pin compatibilityPin-to-pin compatible with ADIS16505
Environmental stress screening48 hours of environmental stress screening in a high- and low-temperature chamberBefore high- and low-temperature compensation and turntable calibration.

Related guides