ChinaDroneRequest a quote →
SkyMEMS IMU488M inertial measurement unit with silver housing, blue label and exposed connector pinsSkyMEMS IMU488M inertial measurement unit with silver housing, blue label and exposed connector pins

SkyMEMS IMU488M High Performance 10DoF MEMS IMU

The SkyMEMS IMU488M is a tactical-grade 10DoF MEMS inertial measurement unit for UAV navigation, flight control, stabilization and robotics. It delivers three-axis angular-rate, acceleration and magnetometer measurements alongside barometer data. A compact, glue-encapsulated construction, UART and SPI interfaces, and operation from -40~+85°C support integration into demanding motion-sensing applications.

SkyMEMSIMU sensors
Applications
UAV flight control, antenna stabilization, navigation and inertial navigation systems
Dimensions
47 × 44 × 14 mm

Get a free quote

Product overview

The SkyMEMS IMU488M combines MEMS sensing with three-axis angular-rate, acceleration and magnetometer outputs, plus barometer data. This tactical-grade 10DoF inertial measurement unit supports UAV flight control, antenna stabilization and navigation, including use within inertial navigation systems. Its applications also extend to industrial robotics, unmanned surface vessels and platform stabilization. Typical measurement ranges are ±450°/s for the gyroscope and ±16g for the accelerometer, with both ranges configurable at the factory. Typical bandwidth is 200Hz, and gyroscope Allan-variance bias instability is 1 °/h.

Built with MEMS components and glue encapsulation, the fully calibrated IMU488M measures 47 × 44 × 14 mm and incorporates a 2 × 12-pin connector. UART communication provides a 230400 bps baud rate and 200 Hz output rate, with factory configuration available for both settings. SPI supports a 25 MHz serial clock and output rates up to 2000 Hz. The unit uses a 3.3 V supply and consumes 0.15 W. Its operating temperature range is -40~+85°C, with vibration resistance of 6.06g across 20-2000Hz and shock resistance of 1000g for 0.5ms.

Flight control & navigation

Specifications

SkyMEMS IMU488M High Performance 10DoF MEMS IMU specifications
SpecificationValue & conditions
ProductSkyMEMS IMU488M tactical-grade 10DoF MEMS inertial measurement unit
Measurement outputsThree-axis angular rate, three-axis acceleration, three-axis magnetometer data and barometer data
ApplicationsUAV flight control, antenna stabilization, navigation and inertial navigation systems
Construction and calibrationMEMS components, glue encapsulation and full calibration
Measurement rangesGyroscope ±450°/s; accelerometer ±16gTypical ranges; gyroscope and accelerometer ranges can be configured at the factory.
Gyroscope bias instability1 °/hAllan variance.
Gyroscope bias repeatability2 °/h
Gyroscope random walk0.1 °/√h
Gyroscope non-linearity100 ppm
Bandwidth200HzTypical.
Accelerometer bias instability60 ug10s average at a fixed temperature within -40~+85°C.
Accelerometer bias repeatability60 ug
Accelerometer random walk0.01 m/s/√h
Accelerometer non-linearity100 ppm
Magnetometer dynamic range±2 Gauss
Magnetometer resolution120 uGauss
Magnetometer noise50 uGaussRMS, 10Hz.
Barometer pressure range450–1100 mbar
Barometer resolution0.1 mbar
Barometer absolute accuracy1.5 mbar
UART communication230400 bps baud rate; 200 Hz output rateUART interface; baud rate and output rate can be configured at the factory.
SPI communication25 MHz serial clock frequency; output rate up to 2000 HzSPI interface.
ReliabilityMTBF 20000 h; continuous working time 120 h
Electrical characteristicsSupply voltage 3.3 V; power consumption 0.15 W; ripple 100mV (P-P)
Operating temperature-40~+85°COperation.
Storage temperature-55°C ~ 105°CStorage.
Vibration resistance20-2000Hz, 6.06g
Shock resistance1000g0.5ms shock duration.
Dimensions47 × 44 × 14 mm
Connector2 × 12 pins

Related guides