| Product | SkyMEMS IMU90 inertial measurement unit |
|---|
| Sensor architecture and processing | MEMS-based inertial sensors with an extended Kalman filter algorithm |
|---|
| Measurement outputs | Yaw, pitch and roll; six-axis angular rate and acceleration |
|---|
| Applications | Dynamic control and attitude systems for unmanned aircraft, ROVs, smart agriculture, machine control, platform stabilization, AGVs and robotics |
|---|
| Construction and calibration | Glue-encapsulated construction with full calibration |
|---|
| Measurement ranges | Gyroscope: ±500°/s; accelerometer: ±16gTypical ranges; gyroscope and accelerometer ranges can be configured at the factory. |
|---|
| Gyroscope sensitivity | 16-bit: 0.02 °/s/LSB; 32-bit: 3.0518×10⁻⁷ °/s/LSB16-bit and 32-bit data formats, respectively. |
|---|
| Gyroscope bias instability | - Minimum: 1 °/h;
- typical: 1.5 °/h;
- maximum: 2 °/h
Allan variance. |
|---|
| Gyroscope initial bias error | - Minimum: 0.01 °/s;
- typical: 0.03 °/s;
- maximum: 0.1 °/s
|
|---|
| Gyroscope random walk | - Minimum: 0.1 °/√h;
- typical: 0.12 °/√h;
- maximum: 0.15 °/√h
|
|---|
| Gyroscope scale factor accuracy | 0.1 % |
|---|
| Gyroscope non-linearity | 0.01 %FSFull scale (FS). |
|---|
| Gyroscope resolution and bandwidth | Resolution: 0.005 °/s; bandwidth: 150 Hz |
|---|
| Accelerometer sensitivity | 16-bit: 0.0005 g/LSB; 32-bit: 7.6294×10⁻⁹ g/LSB16-bit and 32-bit data formats, respectively. |
|---|
| Accelerometer bias instability | - Minimum: 25 ug;
- typical: 35 ug;
- maximum: 45 ug
Allan variance. |
|---|
| Accelerometer initial bias error | - Minimum: 3 mg;
- typical: 4 mg;
- maximum: 5 mg
|
|---|
| Accelerometer random walk | - Minimum: 0.01 m/s/√h;
- typical: 0.025 m/s/√h;
- maximum: 0.04 m/s/√h
|
|---|
| Accelerometer scale factor accuracy | 0.1 % |
|---|
| Accelerometer non-linearity | 0.01 %FSFull scale (FS). |
|---|
| Accelerometer resolution and bandwidth | Resolution: 0.05 mg; bandwidth: 150 Hz |
|---|
| UART output rate | 200 HzUART at 115200 bps. |
|---|
| Configurable UART output rates | 500Hz at 230400bps; 1000Hz at 460800bpsConfigured via UART command at Baud Rate=230400bps or Baud Rate=460800bps, respectively. |
|---|
| SPI clock and output rate | Serial clock frequency: 10 MHz; output rate: 1000 HzSPI interface. |
|---|
| Communication selection | SPI or CANFactory selection. |
|---|
| Electrical supply and consumption | Supply voltage: 3.3 V; power consumption: less than 0.15 W |
|---|
| Temperature limits | Operating: -40°C ~ 85°C; storage: -55°C ~ 100°COperating and storage conditions, respectively. |
|---|
| Housing material | Aluminum |
|---|
| Dimensions and weight | 23.3 × 22.4 × 7.5 mm; less than 15 grams |
|---|
| Connector | 7×2 pins |
|---|
| Standard gravity | G = 9.80665 m/s²Acceleration unit definition. |
|---|