ChinaDroneRequest a quote →

SkyMEMS IMU688 UAV IMU

The SkyMEMS IMU688 UAV IMU is a tactical-grade, six-degree-of-freedom MEMS inertial measurement unit for navigation, control and stabilization. It combines three-axis angular-rate and acceleration sensing in a compact aluminum housing, with ADIS16488 interface and protocol compatibility, built-in temperature compensation, and SPI, UART and CAN communication.

SkyMEMSIMU sensors
Applications
Tactical UAS navigation and control, seekers and platform stabilization.

Get a free quote

Product overview

The SkyMEMS IMU688 UAV IMU combines a three-axis accelerometer and a three-axis angular-rate sensor to measure six degrees of freedom. Capacitive technology and MEMS components are enclosed in a compact aluminum housing measuring 47 × 44 × 14 mm and weighing 50 grams. Applications include tactical UAS navigation and control, seekers, platform stabilization and autonomous vehicles. The unit incorporates temperature calibration and compensation, together with compatibility with the ADIS16488 interface and protocol.

The gyroscope covers ±450°/s and the accelerometer covers ±16g. SPI, UART and CAN each support a 200 Hz sampling rate, with respective communication rates of 15 MHz, 230.4 Kbps and 1 MHz. Power consumption is 1.5 W. The IMU688 operates from -40 to 70°C and supports storage from -45 to 75°C. Vibration resistance is 20~2000Hz at 6.06g, while shock resistance is 1000g for 0.5ms. Continuous working time is 120 h, with an MTBF of 20000 h.

Flight control & navigationCameras & sensors

Specifications

SkyMEMS IMU688 UAV IMU specifications
SpecificationValue & conditions
Product typeSkyMEMS IMU688 UAV IMU tactical-grade MEMS inertial measurement unit.
Measurement axesThree-axis acceleration and three-axis angular-rate sensing.
ConstructionCapacitive technology and MEMS components in a compact aluminum housing.
ApplicationsTactical UAS navigation and control, seekers and platform stabilization.
Autonomous vehicle applicationUsed in autonomous vehicles.
Interface compatibilityCompatible with the ADIS16488 interface and protocol.
Temperature calibrationBuilt-in temperature calibration and compensation algorithm.
Dynamic rangeGyroscope: ±450°/s; accelerometer: ±16g.
Accelerometer bias stability0.06 mg.Allan variance.
Gyroscope Allan bias stabilityZ axis: 1.6 °/h; X and Y axes: 3.2 °/h.Allan variance; respective gyroscope axes.
Gyroscope fixed-temperature bias stabilityZ axis: 6 °/h; X and Y axes: 12 °/h.10s average, fixed temperature within -40~+70°C; respective gyroscope axes.
Gyroscope bias rangeZ axis: ±0.14 °/s; X and Y axes: ±0.4 °/s.Respective gyroscope axes.
Gyroscope full-temperature bias rangeZ axis: ±0.04 °/s; X and Y axes: ±0.12 °/s.Temperature change rate ≤1℃/min; temperature range -40~+70°C; respective gyroscope axes.
Gyroscope startup repeatabilityStartup-to-startup: Z 0.004 °/s, X/Y 0.012 °/s; day-to-day: Z 0.006 °/s, X/Y 0.018 °/s.Startup-to-startup and day-to-day measurements; respective gyroscope axes.
Gyroscope linear acceleration effect on bias0.004 °/s/g.
Gyroscope vibration effect on biasBefore/after: 0.004 °/s/g; before/in-run: 0.004 °/s/g.Vibration: 20~2000Hz, 6.06g; before/after and before/in-run comparisons.
Gyroscope scale factorAccuracy: Z 0.6%, X/Y 1.2%; nonlinearity: Z 0.02%FS, X/Y 0.04%FS.Respective gyroscope axes.
Gyroscope random walk, resolution and bandwidth
  • Random walk: 0.5 º/√h;
  • resolution: 3.052×10−7 º/s/LSB;
  • bandwidth: 200 Hz.
Accelerometer fixed-temperature bias stability0.4 mg.10s average, fixed temperature within -40~+70°C.
Accelerometer bias repeatability1 mg.
Accelerometer scale factorAccuracy: 4%; nonlinearity: 0.2%FS.
Accelerometer resolution and bandwidthResolution: 1.221×10−8 g/LSB; bandwidth: 200 Hz.
Communication interfaces
  • SPI: 15 MHz;
  • UART: 230.4 Kbps;
  • CAN: 1 MHz.
One channel per interface.
Sampling rate200 Hz on each interface.SPI, UART and CAN outputs.
Power consumption and ripplePower consumption: 1.5 W; peak-to-peak ripple: 100 mV.
Dimensions and weight47 × 44 × 14 mm; 50 grams.
Temperature rangesWorking: -40 to 70°C; storage: -45 to 75°C.Working and storage conditions, respectively.
Temperature testTest temperature: -40 to 85°; actual high-temperature testing may exceed 85°. One-hour dwell at both -40° and 85°.Temperature testing; one-hour dwell at each endpoint.
Vibration and shock resistanceVibration resistance: 20~2000Hz, 6.06g; shock resistance: 1000g, 0.5ms.Vibration: 20~2000Hz, 6.06g; shock duration: 0.5ms.
Reliability and continuous operationMTBF: 20000 h; continuous working time: 120 h.

Related guides