ChinaDroneRequest a quote →
SkyMEMS IMU286 6DoF MEMS inertial measurement unit with metal housing and white connectorSkyMEMS IMU286 6DoF MEMS inertial measurement unit with metal housing and white connector

SkyMEMS IMU286 Automotive Grade 6DoF MEMS IMU

The SkyMEMS IMU286 is an automotive-grade 6DoF MEMS inertial measurement unit for navigation, control, motion measurement and platform stabilization. Its compact, shock-proof construction combines three-axis gyroscope and accelerometer sensing with full-temperature factory calibration, factory-configurable measurement ranges and a UART interface using 3.3V TTL signals.

SkyMEMSIMU sensors
Applications
Navigation, control and dynamic motion measurement for unmanned vehicles, unmanned aircraft, unmanned surface vessels and platform stabilization

Get a free quote

Product overview

The SkyMEMS IMU286 Automotive Grade 6DoF MEMS IMU combines a 3-axis gyroscope and a 3-axis accelerometer in a compact, shock-proof sensor. It supports navigation, control and dynamic motion measurement in unmanned aircraft, autonomous vehicles and unmanned surface vessels, as well as platform stabilization. Full-temperature factory calibration trims offset drift over temperature, orthogonality error and sensitivity errors. The module measures 22.4 × 22.4 × 9 mm, weighs 20 grams and incorporates a Molex 5015680607 connector.

Typical measurement ranges are ±450°/s for the gyroscope and ±16g for the accelerometer, with factory configuration available for both ranges. Typical gyroscope bandwidth is 200 Hz, while accelerometer bandwidth is 150 Hz. The UART interface uses 3.3V TTL signals and supports factory-configurable baud and output rates. Supply voltage is 3.2–6 V, with power consumption below 0.5 W. Operating temperature extends from -40°C to 85°C; vibration resistance is 20grms over 20–2000Hz, and shock resistance is 2000g for 0.5ms.

Flight control & navigationCameras & sensors

Specifications

SkyMEMS IMU286 Automotive Grade 6DoF MEMS IMU specifications
SpecificationValue & conditions
ProductSkyMEMS IMU286 Automotive Grade 6DoF MEMS IMU
Sensor constructionShock-proof 6DoF IMU sensor comprising a 3-axis gyroscope and 3-axis accelerometer
CalibrationFactory calibrated across temperature to trim offset drift over temperature, orthogonality error and sensitivity errorsFull-temperature factory calibration.
ApplicationsNavigation, control and dynamic motion measurement for unmanned vehicles, unmanned aircraft, unmanned surface vessels and platform stabilization
Measurement rangesGyroscope ±450°/s; accelerometer ±16gTypical ranges; gyroscope and accelerometer ranges can be configured at the factory.
Gyroscope bias stability5 °/h10s average; -40~+85°C at fixed temperature.
Gyroscope bias repeatability3 °/h
Gyroscope full-temperature bias0.03 °/sPeak over full temperature.
Gyroscope random walk0.2 °/√h
Gyroscope non-linearity100 ppm
Gyroscope axial coupling coefficient1%
Gyroscope linear acceleration effect on bias0.002 °/s/g
Gyroscope bandwidth200 HzTypical.
Accelerometer bias instability25 / 50 / 75 ugAllan variance; minimum, typical and maximum respectively.
Accelerometer initial bias error3 / 4 / 5 mgMinimum, typical and maximum respectively.
Accelerometer resolution0.01 mg
Accelerometer scale factor accuracy0.1 %
Accelerometer non-linearity0.01 %FS
Accelerometer random walk0.01 / 0.015 / 0.02 m/s/√hMinimum, typical and maximum respectively.
Accelerometer bandwidth150 Hz
Baud rate115200 / 460800 / 921600 bpsUART; minimum, typical and maximum respectively; factory configurable.
Output rate200 / 1000 / 2000 HzMinimum, typical and maximum respectively; factory configurable.
ReliabilityMTBF: 20000h; continuous working time: 120h
Electrical requirementsSupply voltage: 3.2 – 6 V; power consumption: less than 0.5 W
Logic levels3.3V TTLUART signals.
Temperature rangesOperating: -40°C ~ 85°C; storage: -55°C ~ 105°COperating and storage conditions respectively.
Vibration resistance20grmsVibration frequency range: 20-2000Hz.
Shock resistance2000g0.5ms shock duration.
Dimensions and weight22.4 × 22.4 × 9 mm; 20 grams
ConnectorMolex connector, model 5015680607

Related guides