Scorpion Commander 15V 60A SBEC ESC (V3)

The Scorpion Commander 15V 60A SBEC ESC (V3) is a 60 Amps continuous electronic speed controller with a switching BEC for receiver and servo power. It provides adjustable braking, starting and gain settings, plus current overload protection. The package includes the controller and instruction manual; IR programming accessories are not included.

ScorpionDrone ESC

Weight: 62.0 g (2.19 oz)
Dimensions: 90 x 30 x 7 mm (3.54 x 1.19 x 0.28 in)

Product overview

The Scorpion Commander 15V 60A SBEC ESC (V3) is an electronic speed controller with a switching BEC that supplies 5V power to a receiver and servos. It supports up to four digital servos or five standard servos on fixed-wing models. The BEC delivers 3 Amps continuously and 5 Amps in bursts, with the full continuous output available during 2-cell to 4-cell LiPo operation. The controller measures 90 x 30 x 7 mm and weighs 62.0 g without connectors.

Programming through the IR programming card provides brake settings from no brake to very hard braking, three low-voltage response options, motor starting booster settings and adjustable power and current gains. Soft start durations are 10, 15 or 20 seconds, with 15 seconds as the factory default. Current overload protection is enabled by default; disabling it voids the warranty. The package contains one Scorpion Commander 15V 60A ESC and one instruction manual. The IR transmitter programming card and IR receiver are not included.

Motors & ESCs

Specifications

Scorpion Commander 15V 60A SBEC ESC (V3) specifications
Specification	Value & conditions
Product	Scorpion Commander 15V 60A SBEC ESC (V3) electronic speed controller
Weight	62.0 g (2.19 oz)Without connectors.
Maximum continuous current	60 Amps
Maximum BEC output	5 Amps @ 5 VBEC output at 5 V.
On resistance	1.38 mOhms
Dimensions	90 x 30 x 7 mm (3.54 x 1.19 x 0.28 in)
Brake settings	1: No brake; 2: Very soft brake (factory default); 3: Soft brake; 4: Hard brake; 5: Very hard brake
Low-voltage cut type	1: Cut 50% (factory default); 2: No cut, LED warning only; 3: Pulse warning
Current overload protection	1: Protection on (factory default); 2: Protection offDisabling current overload protection voids the warranty.
Drive frequency	1: 8 kHz (factory default)
Motor starting booster	1: Soft; 2: Medium; 3: Strong
Soft start duration	1: Short 10 Seconds; 2: Medium 15 Seconds (factory default); 3: Strong 20 Seconds
Governor power gain	1 to 11 (soft to hard); factory default: 5
Current gain	1 to 8 (insensitive to sensitive); factory default: 5
BEC design and purpose	Switching BEC converts battery-pack voltage to 5V for the receiver and servos.
BEC continuous and burst current	3 Amps continuous; 5 Amps burstsBEC output.
Servo capacity	Up to 4 digital servos or 5 standard servosFixed-wing models.
BEC current across battery configurations	Full 3 Amps BEC current without derating as input voltage increases2-cell to 4-cell LiPo operation.
Airplane mode	Airplane mode activated by factory default
CAR/B function	Disabled
Box contents	1 x Scorpion Commander 15V 60A ESC; 1 x instruction manualIncluded equipment.
Programming accessories not included	IR transmitter (programming card) and IR receiver are not included.Excluded equipment.
Packaged weight	86.4gIncluding packaging.