Scorpion Commander 15V 90A ESC SBEC (V3)

The Scorpion Commander 15V 90A ESC SBEC (V3) is a 90 Amps continuous electronic speed controller with a switching BEC for receiver and servo power. It offers IR-programmable control settings and comes with an instruction manual; IR programming equipment is not included.

ScorpionDrone ESC

Weight: 76 g (2.68 oz)
Size: 80 x 30 x 12 mm (3.15 x 1.18 x 0.47 in)

Product overview

The Scorpion Commander 15V 90A ESC SBEC (V3) is an electronic speed controller with a switching BEC that converts battery power to 5V for a receiver and servos. The ESC supports 90 Amps of continuous current, while the BEC delivers 3 Amps continuously with 5 Amps bursts. Full continuous BEC output is available during 2-cell to 4-cell LiPo operation. For fixed-wing models, the BEC can handle up to four digital servos or five standard servos. The controller measures 80 x 30 x 12 mm and weighs 76 g without connectors.

IR programming provides brake settings from no brake to very hard braking, along with selectable cut responses, motor starting boost and soft start durations of 10, 15 or 20 seconds. Governor power gain and current gain are also adjustable. Current overload protection is enabled by default; disabling it voids the warranty. Each box contains one Scorpion Commander 15V 90A ESC and one instruction manual. The IR transmitter programming card and IR receiver are not included.

Motors & ESCs

Specifications

Scorpion Commander 15V 90A ESC SBEC (V3) specifications
Specification	Value & conditions
Weight	76 g (2.68 oz)Without connectors.
Maximum continuous current	90 Amps
Maximum BEC output	5 Amps @ 5 VBurst output.
Continuous BEC current	3 Amps2-cell to 4-cell LiPo operation.
BEC servo capacity	Up to 4 digital servos or 5 standard servosFixed-wing models.
BEC design	Switching BEC supplying 5V for the receiver and servos
On resistance	1.17 mOhms
Size	80 x 30 x 12 mm (3.15 x 1.18 x 0.47 in)
Brake settings	1: No brake; 2: Very soft brake (factory default); 3: Soft brake; 4: Hard brake; 5: Very hard brake
Low-voltage cut type	1: Cut 50% (factory default); 2: No cut, just LED warning; 3: Pulse warning
Current overload protection	1: Protection on (factory default); 2: Protection offChoosing protection off voids the warranty.
Drive frequency	1: 8 kHz (factory default)
Motor starting booster	1: Soft; 2: Medium; 3: Strong
Soft start duration	1: Short 10 Seconds; 2: Medium 15 Seconds (factory default); 3: Strong 20 Seconds
Governor power gain	1 to 11 (soft to hard); factory default: 5
Current gain	1 to 8 (insensitive to sensitive); factory default: 5
Airplane mode	Activated by factory default
CAR/B	Disabled
Included equipment	1 x Scorpion Commander 15V 90A ESC; 1 x instruction manual
Excluded programming equipment	IR transmitter (programming card) and IR receiver are not included
Packaged weight	232.3gIncluding packaging.