Scorpion Commander 15V 110A ESC SBEC (V3)

The Scorpion Commander 15V 110A ESC SBEC (V3) is an electronic speed controller rated for 110 Amps continuous current, with a switching BEC for receiver and servo power. It offers IR programming for braking, protection, soft start and gain settings, and is supplied with an instruction manual.

ScorpionDrone ESC

Weight: 84g (2.96 oz)
Dimensions: 90 x 30 x 13 mm (3.54 x 1.18 x 0.51 in)

Product overview

The Scorpion Commander 15V 110A ESC SBEC (V3) combines electronic speed control with a switching BEC that supplies 5V power to the receiver and servos. The BEC provides 3 Amps continuously with 2-cell to 4-cell LiPo input and supports bursts of 5 Amps. On fixed-wing models, it can handle up to four digital servos or five standard servos. The controller measures 90 x 30 x 13 mm and weighs 84g without connectors.

An IR programming card provides access to brake settings, cut-off response, current overload protection, drive frequency, soft start duration and gain adjustments. Brake choices range from no brake to very hard braking, while soft start offers 10, 15 and 20 Seconds. Current overload protection is enabled by default; disabling it voids the warranty. The package contains one Scorpion Commander 15V 110A ESC and an instruction manual. The IR transmitter programming card and IR receiver are not included.

Motors & ESCs

Specifications

Scorpion Commander 15V 110A ESC SBEC (V3) specifications
Specification	Value & conditions
Product	Scorpion Commander 15V 110A ESC SBEC (V3) electronic speed controller
Weight	84g (2.96 oz)Without connectors.
Maximum continuous current	110 Amps
Maximum BEC output	5 Amps @ 5 VAt 5 V; burst output.
On resistance	0.78 mOhms
Dimensions	90 x 30 x 13 mm (3.54 x 1.18 x 0.51 in)
Brake settings	1: No brake; 2: Very soft brake (factory default); 3: Soft brake; 4: Hard brake; 5: Very hard brake
Program cut type	1: Cut 50% (factory default); 2: No cut, LED warning only; 3: Pulse warning Low-voltage cut-off response.
Current overload protection	1: Protection on (factory default); 2: Protection offSelecting protection off voids the warranty.
Drive frequency	1: 8 kHz (factory default)
Soft start duration	1: Short, 10 Seconds; 2: Medium, 15 Seconds (factory default); 3: Strong, 20 Seconds
Power gain (GOV P gain)	1 to 11 (soft to hard); factory default: 5
Current gain (SB I gain)	1 to 8 (insensitive to sensitive); factory default: 5
BEC construction and output voltage	Switching BEC converts battery-pack voltage to 5VFor powering the receiver and servos.
Continuous BEC current	3 AmpsWith 2-cell to 4-cell LiPo input.
Servo capacity	Up to 4 digital servos or 5 standard servosOn fixed-wing models.
Programming interface	IR Programming Card
Airplane mode	Activated by factory default
CAR/B function	Disabled
Box contents	1 x Scorpion Commander 15V 110A ESC; 1 x instruction manualIncluded equipment.
Programming equipment not included	IR transmitter (programming card) and IR receiver are not includedExcluded equipment.
Packaged weight	240.35gIncluding packaging.