The HQProp Flux 2207 Motor, also identified as Flux2207, is a motor component in the multirotor hardware category. Its configuration includes a KV selector.
The HQProp Flux 2207 Motor is a multirotor motor component identified as Flux2207. Its procurement identity is the individual motor, rather than a complete flight platform or airframe kit. KV is a selectable configuration parameter.
| Specification | Value & conditions |
|---|---|
| Brand and model | HQProp Flux 2207 Motor |
| Product identifier | Flux2207 |
| Product category | Multirotor motor |
| Configuration selector | KV selection; no numerical options specified. |
The Scorpion HK5-4030-355kv is a helicopter BLDC motor for very light and smooth flying in 550–700 size aircraft on 12s–14s LiPo batteries. It combines internal and external fans, delivers 2900 watts continuously, and includes connectors, heat shrink and a hardware/accessory pack.
The Mugin GV360 / GV472 VTOL Servo and Propulsion Kit is a component package for the corresponding H-tail aircraft. Its reference configuration combines electric lift propulsion, gasoline pusher propulsion, servos and accessories; actual supplied items take precedence. The airframe and key flight systems are excluded, with assembly and integration required.
The HOBBYWING MSC 30x9.8 is a matte, ultra-light carbon-fiber drone propeller intended for efficient propulsion and high-altitude applications. Its carbon-fiber/epoxy construction incorporates an aerodynamic airfoil and blade-tip winglets. Published operating ranges support component selection.
The M9C12 IPE V3.1 Drone Motor is a propulsion component with selectable 100KV and 110KV configurations, both listed for 12S supply. Published thrust is 4~6 kg sustained and 13.8 kg maximum. Two weights are stated.
The T-MOTOR Antigravity MN5008 KV340 is a brushless UAV propulsion motor supplied with a hardware pack. Its published KV340 configuration uses 6S LiPo power and P17–18-inch propellers. Procurement should account for its installation dimensions, duration-qualified electrical limits, reference-only bench data and conflicting ESC recommendations.
The Gemfan F4019 is a folding tri-blade propeller for 4-inch FPV platforms, intended for freestyle, technical flying, endurance-focused builds, and training. Its polycarbonate blades use a 1.5 mm, three-hole mounting interface for 1505–1806 class motors. Packs contain two clockwise and two counterclockwise propellers.
The Scorpion A2-6518 PNP Combo (12s / 40cc / 5500w) is an electric propulsion package for 35–40cc-class aerobatic and UAV airplanes. It combines a BLDC motor, preprogrammed ESC, cross mount and standoffs for installation in commonly used 74–78-inch airframes, with a recommended 12s battery and Scorpion 22x10 carbon propeller.
The ZHTAERO MN8017 is an Antigravity propulsion motor for multirotor UAVs, with maximum thrust of 16.8 kg and motor weight of 453 g. Its lightweight, high-efficiency design uses imported bearings and high-strength 7075 aviation aluminium alloy to support long motor endurance.
The ALPHA 80A 12S from ZHT Technology Co., Ltd. is a multi-rotor drone electronic speed controller with stated low noise, temperature and interference, fast response and high efficiency. A note identifying the motor type is requested for compatibility.
