ChinaDroneRequest a quote →
Kakute H7 Mini flight controller board with connectors and gold solder padsKakute H7 Mini flight controller board with connectors and gold solder pads

Kakute H7 Mini Flight Controller Stacks

The GS Kakute H7 Mini Flight Controller Stacks are compact flight control hardware for FPV drones. The 31x30x6mm, 5.5g controller combines a 480 MHz STM32H743 processor with a BMI270 IMU in the currently shipping configuration, a BMP280 barometer, onboard flash, OSD hardware, and ESC and video system connection ports.

GesaiDrone flight controller
Application
FPV drones
Weight
5.5 g
Dimensions
31x30x6 mm

Get a free quote

Product overview

The GS Kakute H7 Mini Flight Controller Stacks provide flight control hardware for FPV drones in a compact 31x30x6mm format weighing 5.5g. An STM32H743 32-bit processor runs at 480 MHz, accompanied by a BMI270 IMU in the currently shipping configuration and a BMP280 barometer. The controller incorporates an AT7456E OSD and 128Mbits of onboard flash. Its mounting pattern measures 20 x 20mm, with Φ3.6mm holes and M3 and M2 grommets for installation.

The controller accepts a 2S-6S battery input and incorporates a 5V 2A BEC. Six UARTs—1, 2, 3, 4, 6 and 7—are accompanied by nine PWM outputs: eight motor outputs and one LED output. A JST-SH1.0_8pin port connects to 4in1 ESCs, while a JST-SH1.0_6pin port serves DJI/Caddx HD systems and other VTX equipment. The VTX ON/OFF pit switch can be enabled using USER1 in the Betaflight Mode tab. Do not enable this switch when using a DJI FPV Remote Controller.

Flight control & navigation

Specifications

Kakute H7 Mini Flight Controller Stacks specifications
SpecificationValue & conditions
ProductKakute H7 Mini Flight Controller Stacks
BrandGS
ApplicationFPV drones
MCUSTM32H743 32-bit processor running at 480 MHz
IMUBMI270Currently shipping configuration.
BarometerBMP280
OSDAT7456E
Onboard flash128Mbits
VTX ON/OFF pit switchCan be enabled using USER1 in the Betaflight Mode tabDo not enable this pit switch when using DJI FPV Remote Controller.
UARTs6x (1,2,3,4,6,7)
PWM outputs9x (8 Motor Output, 1 LED)
Battery input voltage2S-6S
BEC5V 2A
Mounting20 x 20mm, Φ3.6mm holeWith M3 & M2 grommets.
Dimensions31x30x6mm
Weight5.5g
ESC portJST-SH1.0_8pinFor 4in1 ESCs.
Video system portJST-SH1.0_6pinFor DJI/Caddx HD System and other VTX.

Related guides