ChinaDroneRequest a quote →
GEPRC ELRS 915M/2.4G Gemini Xrossband Receiver board with two antenna connectorsGEPRC ELRS 915M/2.4G Gemini Xrossband Receiver board with two antenna connectors

GEPRC ELRS 915M/2.4G Gemini Xrossband Receiver

The GEPRC ELRS 915M/2.4G Gemini Xrossband Receiver uses dual LR1121 chips for ExpressLRS reception. With 915M/2.4G antennas, it supports 915MHz Gemini, 2.4GHz Gemini and 915M+2.4G dual-band modes; dual-band operation requires a dual-band TX module. Its compact design includes a temperature-compensated crystal oscillator, WiFi firmware updates and telemetry power up to 100mW.

GEPRCRC transmitters & receivers
Operating voltage
5 V
Weight
1.7 g
Dimensions
18×23.6×5.7 mm

Get a free quote

Product overview

The GEPRC ELRS 915M/2.4G Gemini Xrossband Receiver brings ExpressLRS reception to a compact dual-band design. Paired with 915M/2.4G antennas, its two LR1121 chips support switching between 915MHz Gemini, 2.4GHz Gemini and 915M+2.4G dual-band modes. Dual-band operation requires a dual-band TX module. The receiver is also compatible with existing 915M and 2.4G ELRS TX modules. Its Semtech third-generation LR1121 RF architecture supports 150 – 960MHz sub-GHz and 2.4GHz bands for simultaneous dual-band transmission, while dual-frequency operation enhances interference resistance and stability.

The receiver measures 18×23.6×5.7mm and weighs 1.7g for the receiver alone. Operating at 5V, it combines an ESP32-PICO-D4, two LR1121 chips and a TCXO temperature-compensated crystal oscillator for stable performance across temperature variations. Refresh rate spans 25Hz-1000Hz, with telemetry power up to 100mW. A built-in WiFi antenna supports firmware updates, and an SH1.0 connector simplifies installation. The antenna connector is ipex1. Supplied equipment comprises one receiver, two 915M/2.4G dual-band T-antennas, one heat shrink tube, one 4-pin silicone connection cable and one user manual.

Links & controllers

Specifications

GEPRC ELRS 915M/2.4G Gemini Xrossband Receiver specifications
SpecificationValue & conditions
ModelGEPRC ELRS 915M/2.4G Gemini Xrossband Receiver
Dimensions18×23.6×5.7mm
Weight1.7gOnly receiver.
ChipsESP32-PICO-D4, LR1121x2
Crystal oscillatorTCXO
Frequency bands915MHz Gemini,2.4GHz Gemini,915M+2.4G Dual-BandPaired with 915M/2.4G antennas; dual-band operation requires dual-band TX module support.
Refresh rate25Hz-1000Hz
Operating voltage5V
Antenna connectorIpex1
Telemetry powerUp to 100mW
FirmwareGEPRC 900/2400 Gemini Xrossband RX
SystemDual-band receiver developed from the ExpressLRS open-source project
RF chip architecture and band supportSemtech third-generation LR1121 RF chip supporting 150 – 960MHz (sub-GHz) and 2.4GHz bands for simultaneous dual-band transmission
TX module compatibilityCompatible with existing 915M and 2.4G ELRS TX modules
Interference resistance and stabilityEnhanced interference resistance and stabilityDual-frequency mode.
Firmware updatesBuilt-in WiFi antenna for firmware updates
Installation connectorSH1.0 connector
Included equipment1 x ELRS 915M/2.4G Gemini Xrossband Receiver; 2 x 915M/2.4G Dual-band T-Antennas; 1 x heat shrink tube; 1 x 4-pin silicone connect cable; 1 x user manual

Related guides