ChinaDrone.Request a quote ↗
Home /components

Drone components from China

Explore drone components and find options for your aircraft.

Components

DYS MB30030 speed controller with blue casing and attached wires.industry

DYS MB30030 speed controller

By DYS

The DYS MB30030 is a multicopter electronic speed controller supplied with updated SimonK firmware, a separate power-stage heat sink and a 5V, 2A BEC. It supports 30A continuous output and 40A bursts lasting up to 10 seconds, with DC 6–16.8V input specified for 2–5S Lixx batteries.

Explore product ↗
DYS MB30040 speed controller with blue casing and attached wires.industry

DYS MB30040 speed controller

By DYS

The DYS MB30040, designated 40A HV ESC, is a multicopter speed controller supplied with updated SimonK firmware. Its 55 × 26 × 13mm, 39g package incorporates a separate MOS heat sink. It accepts DC 6–22.2V and supports 40A continuous output, with 60A bursts limited to 10 seconds.

Explore product ↗
DYS MB30050 50A SK electronic speed controller with blue casing and attached wires.industry

DYS MB30050 speed controller

By DYS

The DYS MB30050, designated 50A SK ESC, is a multicopter speed controller supplied with updated SimonK firmware. It measures 68 × 27 × 10mm and weighs 40g, with 45A continuous output, 55A instantaneous output for 10 seconds, 7–26V DC input, 2–6S LiPo configuration and an OPTO BEC designation.

Explore product ↗
DYS Mini F4 flight controller circuit boardindustry

DYS Mini F4 flight controller

By DYS

The DYS Mini F4 is a compact flight controller for integration with separate ESCs, combining an STM32F405 processor, six-axis sensing and OSD control. Its 30 × 27mm board uses 20 × 20mm mounting spacing and weighs 6g without cable. It supports Betaflight, 2–4S LiPo input and VTX control protocols.

Explore product ↗
DYS MR1407 4300KV brushless motor with threaded shaft and wires.industry

DYS MR1407 brushless motor

By DYS

The DYS MR1407 is a compact brushless motor intended for FPV racing, with a 4300 KV rating and 3–4S LiPo specification. It combines an imported NMB bearing, N52 magnet and 0.2mm lamination in a 14.66g motor body measuring Φ18.3 × 16.0mm. Stated thrust is 540g with a 3-inch propeller.

Explore product ↗
DYS Osprey SX7V1 frame kit viewed from above, with a carbon-fibre frame and green fittings.industry

DYS Osprey SX7V1 frame kit

By DYS

The DYS Osprey SX7V1 is a carbon-fibre FPV drone frame kit.

Explore product ↗
DYS SE2008 brushless motor with red and black housing and threaded shaft.industry

DYS SE2008 motor

By DYS

The SE2008 is a brushless motor for UAV use.

Explore product ↗
DYS SE2205 brushless motor with black housing and threaded shaft.industry

DYS SE2205 brushless motor

By DYS

The DYS SE2205 is a brushless propulsion motor for FPV racing, offered in 2300KV and 2550KV versions. Its 30g body measures Φ27.7 × 19.0mm and supports 3–5S LiPo batteries. Construction includes an NMB bearing, N52 magnet and screw-retained hollow shaft; electrical limits and pull depend on the selected version and operating configuration.

Explore product ↗
industry

DYS SE2205 PRO brushless motor

By DYS

The SE2205 PRO is a brushless motor for UAVs.

Explore product ↗
DYS SF2207 brushless motor with threaded shaft and attached wires.industry

DYS SF2207 brushless motor

By DYS

The DYS SF2207 is a propulsion motor with 1750KV, 2450KV and 2750KV configurations. Its current, pull and power figures depend on specific LiPo battery and propeller combinations at 16 V or 20 V.

Explore product ↗
DYS SF2306 brushless motor with a red housing, threaded shaft and black wires.industry

DYS SF2306 brushless motor

By DYS

The DYS / DongYang SF2306 motor has published 1750KV and 2500KV variants, with electrical and pull data for specified battery/propeller arrangements at 16 V and 20 V.

Explore product ↗
industry

DYS Shu brushless motor

By DYS

The Shu is a brushless motor listed for UAV use.

Explore product ↗

Browse by category