ChinaDrone.Request a quote ↗
COMPONENTZHTAERO

ZHTAERO P19*5.7

Company: ZHT Technology Co., Ltd. ↗

The ZHTAERO P19*5.7 is a 19 × 5.7-inch carbon-fiber propeller supplied as two pieces, or one pair. It carries claims of longer flight time, higher load capability and 100% balance, without quantified flight-duration or load improvements.

Get a free sourcing quote for ZHTAERO P19*5.7

ModelZHTAERO P19*5.7
Product typePropeller
Size designation19 × 5.7 inches
MaterialCarbon fiber
Supplied quantity2 pieces / 1 pair
Flight-duration claimLonger flight time

Product overview

The ZHTAERO P19*5.7 is a carbon-fiber propeller supplied as two pieces forming one pair. Its size designation is 19 × 5.7 inches. The procurement item is a paired propulsion component, with carbon fiber identified as its construction material.

The P19*5.7 carries claims of longer flight time and higher load capability, together with a stated 100% balance. These are qualitative flight-duration and load-capability attributes; neither claim supplies a numerical increase, payload figure or operating configuration.

Specifications

SpecificationValue & conditions
ModelZHTAERO P19*5.7
Product typePropeller
Size designation19 × 5.7 inches
MaterialCarbon fiber
Supplied quantity2 pieces / 1 pair
Flight-duration claimLonger flight time
Load-capability claimHigher load capability
Balance100% balance

Ask for the ZHTAERO P19*5.7 price ↑

More motors, ESCs & propellers from Chinese manufacturers →
Scorpion HK-4015 Motor Bearing Kit with two bearings in retail packaging
Component

Scorpion HK-4015 Motor Bearing Kit

By Scorpion

The Scorpion HK-4015 Motor Bearing Kit supplies two original-equipment replacement bearings for HK-4015 Series motors. Each measures 13mm outside diameter by 6mm inside diameter by 5mm thick. The bearings fit snugly into the motor housings and require installation pressure through the outer race.

SIYI CAN LINK tuning module with USB port and green indicator light.
Component

SIYI CAN LINK

SIYI

SIYI CAN LINK is a propulsion upgrade and parameter tuning module for computer-based power-system maintenance. It supports ESC firmware upgrades and parameter adjustments, real-time data monitoring, historical data access and stored fault analysis. The module also supports upgrades to its own firmware.

HOBBYWING V13828 motor with black cylindrical housing and attached cables, shown at an angle.
Component

HOBBYWING V13828

HOBBYWING

HOBBYWING V13828, specified as V13828-55KV, is a heavy-lift propulsion motor for medium and large VTOL aircraft. Procurement assessment should address its mounting envelope, cable routing and recommended propeller, ESC and battery combination. Package contents are not explicitly defined, and published thrust, current and laboratory data retain configuration and measurement qualifications.

MAD Components 29 Inch Carbon Fiber Propeller 1pc, black two-blade propeller with a central mounting hole
Component

29 Inch Carbon Fiber Propeller 1pc

By MAD Components

The MAD 29 Inch Carbon Fiber Propeller 1pc is a single propulsion component with hollow carbon-fiber-and-epoxy blades, a solid drillable hub and a gloss finish. Available pitch selections are 10, 11 and 12. Each propeller is individually inspected and pre-balanced before supply.

CKESC ROCK 280A-HC electronic speed controller with black finned housing and attached cables
Component

CKESC ROCK 280A-HC

CKESC

The CKESC ROCK 280A-HC from Nanchang ChangKong Technology Co., Ltd is a 12–26S brushless UAV electronic speed controller with PWM control and serial telemetry. It supports 140 A continuous operation with specified cooling and 280 A for three seconds. Integration provisions include isolated signal interfaces, optional PWM+CAN communication and no BEC.

KEEP EXPLORING

Similar products

Browse all products ↗
HOBBYWING XRotor Micro BLHeli-s 30A DShot600 electronic speed controller with wires and solder tabs
Motors & ESCs

HOBBYWING XRotor Micro BLHeli-s 30A DShot600

HOBBYWING

The HOBBYWING XRotor Micro BLHeli-s 30A DShot600 is a compact ESC for competition FPV drones, specified for 150-280mm applications. It combines 30A continuous and 40A peak current ratings with 2-4S LiPo input, multiple control protocols and BLHeli-S programming. Integration uses supplied input leads and motor solder tabs, with no BEC or power connectors.